Auto Tray Selection - Oki c831n User Manual

Auto Tray Selection

You can set in the printer driver to automatically
switch paper feed trays with the same size of
paper loaded.
First, set on the operator panel for the MP tray
to be available for auto selection. Then, set the
auto selection of the tray with the printer driver.
Note
● Make sure to set a paper size for Tray1, Tray2/3/4
(option) and MP tray. Available paper size differs
depending on each tray. For details, refer to the User's
Manual (Setup).
Memo
● In the default settings, the [Tray Usage] is [Do Not
Use]. When at default settings, the MP tray is not
supported by the auto tray switching function.
1
Press the <Fn> key.
Memo
● When a printer is in the power saving mode, press
the <POWER SAVE> button to restore from the
mode.
2
Enter <9> and <5> using the ten-key
pad and press the <ENTER> button.
3
Press the scroll button
[When Mismatching] and then press
the <ENTER> button.
4
Press the <ON LINE> button to exit the
menu mode.
5
Specify a paper tray in the printer driver
and start printing.
For Windows PCL Printer Driver
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Click [Preferences] or [Properties].
4
On the [Setup] tab, select [Auto] from
[Source].
5
Configure other settings if necessary and
then start printing.
to select
- 33 -
For Windows PS Printer Driver
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Click [Preferences] or [Properties].
4
Select the [Paper/Quality] tab.
5
Select [Automatically Select] from
[Paper Source].
6
Configure other settings if necessary and
then start printing.
For Windows XPS Printer Driver
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Click [Preferences] or [Properties].
4
On the [Setup] tab, select [Auto] from
[Source].
5
Configure other settings if necessary and
then start printing.
For Mac OS X PS Printer Driver
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Select [Paper Feed] from the panel
menu.
4
Select [All pages From] and select
[Auto Select].
5
Configure other settings if necessary and
then start printing.
Memo
● If the print dialog contains only two menus and does not
contain the options you expect to see on Mac OS X 10.5
or 10.6, click the button on the side of the [Printer]
menu.
1