Mac Os X Utilities; Panel Language Setup; Network Card Setup - Oki c831n User Manual

Mac OS X Utilities

Mac OS X Utilities
„ „
This section explains utilities you can use in Mac OS X.

Panel Language Setup

You can change the operator panel display
language.
4
1
Output a menu map for the printer.
To output settings, press the <ENTER> button,
and select [Print Setup]>[Configuration].
2
Launch the panel language setup utility.
Reference
● "Installing Utilities" P.86
3
Select a method of connection.
When selecting [TCP/IP], enter an IP address.
You can check the IP address on the menu map
output in step 1.
4
Click [OK].
5
For the menu map "Language Format"
value, check that the value displayed
on the screen matches the following
conditions.
The first digit of the version
Condition 1:
number matches.
The value displayed on the screen
Condition 2: is the same as or newer (higher)
than the Language Format value.
Memo
● If Condition 1 is not met, an error will be displayed
in the operator panel when downloading. If Condition
1 is not met, an error will be displayed in the control
panel when downloading. In order to restore,
restart the printer. In case that Condition 1 is met
but Condition 2 is not met, though the printer can
be used, some setting names may be displayed in
English.
6
Select a language.
7
Click on [Download].
The language setting file will be sent to the
printer, and when sending is complete, a message
will be displayed.
8
Restart the printer.

Network Card Setup

You can use the Network Card Setup to
configure the network.
In order to use Network Card Setup, TCP/IP
needs to be activated.
Note
● Configure the TCP/IP settings.
Configuring the IP Address
1
Launch Network Card Setup.
Reference
● "Installing Utilities" P.86
2
Select the printer.
3
Select [IP Address...] from the
[Printer] menu.
4
Configure the settings if necessary and
click [Save].
5
Enter the password and click on [OK].
- The default password is the last 6
alphanumerical digits of the Mac address.
- The password is case sensitive.
6
Click on [OK] to activate the new
settings.
Restart the printer network card.
- 100 -