Oki c831n User Manual page 75

Item
System Power Save time
Adjust
Sleep Time
Auto Power Off Time
Clearable Warning
Auto Continue
Manual Timeout
Wait Timeout
Low Toner
Jam Recovery
Error Report
Print Position
Adjust
Paper Black Setting
Paper Color Setting
Factory Default
1 minute
15 minutes
4 hours
ONLINE
Off
60 seconds
40 seconds
Continue
On
Off
X Adjust 0.00millimeter
Y Adjust 0.00millimeter
Duplex X Adjust 0.00millimeter
Duplex Y Adjust 0.00millimeter
0
0
- 75 -
Changing the Equipment Settings
Description
Sets how many minutes the printer waits
before activating the power save mode.
Sets the time to switch from the power save
mode to the sleep mode.
Sets the time to switch from the standby
mode to the power off mode.
Sets the timing for deletion of clearable
warnings.
Sets whether to recover the printer
automatically when a memory overflow or
tray requesting occurs.
Sets how many seconds the printer waits for
the paper to be fed from the manual paper
tray.
Sets how many seconds the printer will wait
before force printing a job after the data stops
coming.
Sets whether to continue or stop printing
when a low on toner error occurs.
Sets whether the printer will attempt to re-
print any pages lost due to a paper jam once
the jam has been cleared.
Sets whether to print out the error details
when an internal error occurs.
Adjusts the position of the whole printing
image perpendicular (landscape orientation)
to the direction of paper movement (at 0.25
mm intervals).
Adjusts the position of the whole printing
image parallel (portrait orientation) to the
direction of paper movement (at 0.25 mm
intervals).
Adjusts the position of the whole printing
image on the reverse side of duplex printing
perpendicular (landscape orientation) to the
direction of paper movement (at 0.25 mm
intervals).
Adjusts the position of the whole printing
image on the reverse side of duplex printing
parallel (portrait orientation) to the direction
of paper movement (at 0.25 mm intervals).
Sets values to make a fine adjustment if
the printing result is faded or there are dust
specks on the print when printing in the
plain paper and black mode. Decrease the
value when there are dust specks in the area
printed with high density. Increase the value
when the printing result is faded.
Sets values to make a fine adjustment if
the printing result is faded or there are dust
specks on the print when printing in the
plain paper and color mode. Decrease the
value when there are dust specks in the area
printed with high density. Increase the value
when the printing result is faded.
3