Ipp Printing - Oki c831n User Manual

Changing Network Settings From the Web Page
10
Click [Submit].
The setting procedure for a certificate issued by a
certificate authority is finished.
Enabling Encryption
After creating a certificate, perform the following
procedure to enable encryption.
When you change the settings from the web
page to enable encryption, communication is
encrypted immediately after that change has
been made.
1
Perform "Creating a Certificate" P.133
steps 1 to 3 to enter the encryption
screen.
2
Select [Enable] for the desired protocol
on which encryption is applied.
5
3
Click [Encryption Strength Settings].
4
Select the encryption strength and click
[OK].
5
Click [Submit].
Opening the Web Page
Memo
● Ensure to enable the protocol on which encryption is
applied in "Enabling Encryption"
1
Launch a web browser.
2
Enter "https://your printer's IP address"
in the URL address bar and then press
the <Enter> key.

IPP Printing

IPP printing allows you to transmit your print job
data from your computer to the printer via the
Internet.
„ Enabling IPP Printing
IPP printing is disabled by factory default. To
perform IPP printing, enable IPP first.
1
Access the printer's web page and log in
as the administrator.
2
Select [Admin Setup].
P.134.
- 134 -
3
Select [Network Setup] > [IPP] >
[Settings].
4
Select [Enable] in [IPP].
5
Click [Submit].
„ Setting Up Your Printer As an IPP
Printer (for Windows Only)
Add the printer to your computer as an IPP
printer.
1
Click [Start] and select [Devices and
Printers] > [Add a printer].
2
On the [Add Printer] wizard, select
[Add a network, wireless or
Bluetooth printer].
3
In the list of available printers, select
[The printer that I want isn't listed].
4
Select [Select a shared printer by
name].
5
Enter "http://your printer's IP address/
ipp" or "http://your printer's IP address/
ipp/lp" and then click [Next].
6
Click [Have Disk].
7
Insert the software DVD-ROM into the
computer.
8
Enter the following value in
[Copy from], and then click [Use].
- For PCL driver, "D:\Drivers\EN\PCL".
- For PS driver, "D:\Drivers\EN\PS".
- For XPS driver, "D:\Drivers\EN\XPS".
Memo
● In the above examples, the DVD-ROM drive is setup
as the D drive.
9
Select the NFL file and click [Open].
10
Click [OK].
11
Select a model and click [OK].
12
Click [Next].
13
Click [Finish].
14
Print the test page after installation is
complete.