Emphasizing Fine Lines; Auto Tray Selection - Oki B721 User Manual

Emphasizing Fine Lines

You can print fine lines and small characters
clearer.
With some applications, if this function is turned
on, the spaces in bar codes may become too
narrow. If this happens, turn off this function.
Note
● This function is not available with the Windows PCL/XPS
printer driver.
Memo
● This function is turned on by default.
For Windows PS Printer Driver
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Click [Preferences].
4
Select the [Job Options] tab.
5
Click the [Advanced].
6
Select the [Adjust ultra fine lines]
check box and then click [OK].
7
Configure other settings if necessary and
then start printing.
For Mac OS X PS Printer Driver
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Select [Printer Features] from the
panel menu.
4
Select [Job Option] from [Feature
Sets].
5
Select the [Adjust ultra fine lines]
check box.
6
Configure other settings if necessary and
then start printing.
Memo
● If the print dialog does not contain the options you expect
to see, click the [Show Details] button at the bottom of
the dialog.

Auto Tray Selection

You can set in the printer driver to automatically
switch paper feed trays with the same size of
paper loaded.
First, set on the operator panel for the MP Tray
to be available for auto selection. Then, set the
auto selection of the tray with the printer driver.
Note
● Make sure to set a paper size for Tray1, Tray2/3/4
(option) and MP Tray. Available paper size differs
depending on each tray. For details, refer to the User's
Manual (Setup).
Memo
● In the default settings, the [Tray Usage] is [Do Not
Use]. When at default settings, the MP Tray is not
supported by the auto tray switching function.
● When a printer is in the power saving mode, press the
<POWER SAVE> button to restore from the mode.
1
Press the <Fn> key.
2
Enter <9> and <5> using the ten-key
pad and press the <ENTER> button.
3
Press the scroll button
[When Mismatching] and then press
the <ENTER> button.
4
Press the <ON LINE> button to exit the
menu mode.
5
Specify a paper tray in the printer driver
and start printing.
For Windows PCL/XPS Printer Driver
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Click [Preferences].
4
On the [Setup] tab, select [Auto] from
[Source].
5
Configure other settings if necessary and
then start printing.
- 31 -
Printing with Various Functions
to select
1