Oki c831n User Manual page 78

Changing the Equipment Settings
Admin Setup Print Setup
PS Setup
3
PCL Setup
XPS Setup
Item
X Dimension
Y Dimension
Network Protocol
USB Protocol
Font Source
Font Number
Font Height
Symbol Set
A4 Print Width
White Page Skip
CR Function
LF Function
Print Margin
True Black
Pen Width Adjust
Tray ID# Tray 2
Tray 3
Tray 4
MP Trays
DigitalSignature
DiscardControl
MC Mode
Unzip Mode
White Page Skip
Factory Default
210millimeters Sets the default width of the custom
or paper.
8.5inches
297millimeters Sets the default length of the custom
or paper.
11inches
RAW Sets the PS communication protocol
mode for JCI-NIC.
RAW Sets the PS communication protocol
mode for USB.
Resident2 Sets the location of the PCL default font.
C1 Sets the PCL font number.
12.00 point Sets the height of the PCL default font.
The height is displayed to two decimal
points (at 0.25 point intervals).
PC-8 Selects a PCL symbol set.
78 column Sets the number of columns for
automatic line feed on A4 paper for
PCL. The number of columns is based
on when the font pitch is 10CPI and the
Auto CR/LF mode is set to off.
Off Sets whether to eject a blank page when
an FF command (0CH) is received in PCL.
CR Sets the printer operation when a CR
code is received in PCL.
LF Sets the printer operation when a LF
code is received in PCL.
Normal Sets the non-printable area of page.
Off PCL: Sets whether to use composite
black (CMYK mixed) or true black (K
only) for the 100% black area of an
image.
On Adjusts the width of thin lines so that the
lines become visible.
5 Sets a number of tray 2 for the paper
feed destination command (ESC&l#H) in
PCL5 emulation.
This menu is displayed only when the
tray 2 is installed.
20 Sets a number of tray 3 for the paper
feed destination command (ESC&l#H) in
PCL5 emulation.
This menu is displayed only when the
tray 3 is installed.
21 Sets a number of tray 4 for the paper
feed destination command (ESC&l#H) in
PCL5 emulation.
This menu is displayed only when the
tray 4 is installed.
4 Sets a number of MP tray for the paper
feed destination command (ESC&l#H) in
PCL5 emulation.
Off Sets the DigitalSignature function.
Auto Sets the DiscardControl function.
On Sets the MarkupComaptibility function.
Speed Set the extraction method for XPS files.
Off Sets whether to eject a blank page in
XPS.
- 78 -
Description