Displaying Vehicle Information And Programming Vehicle System Functions; Displaying Fuel Consumption Information And Programming For The Automatic Alarm Display; I Displaying Fuel Consumption Information - Subaru Tribeca 2012 Quick Reference Manual

Hide thumbs Also See for Tribeca 2012:

Table of Contents

Displaying Vehicle Information and Programming Vehicle System Functions

Use the following procedure to display the current fuel consumption rate, average fuel consumption rate,

and range you can drive on the remaining fuel.

This completes the procedure.

• Current and average fuel consumption rates will change all time due to driving and other conditions. The displayed data, including

remaining fuel range data, may be different from the actual values. It is advisable that you refuel well in advance of reaching a displayed

• Displayed current and average fuel consumption rates are based on estimates during running, not on accurate measurements.

• The average fuel consumption rate is associated with the driving after the last resetting of each trip meter. If the A or B trip meter is

reset, the average fuel consumption rate will also be reset. After resetting the trip meter, the average fuel consumption rate will not be

displayed until the vehicle has been driven approximately 1 mile from the reset point.

The fuel consumption information screen will be displayed.

Table of Contents