Programming Vehicle System Functions; I Programming Display And Answerback Beep - Subaru Tribeca 2012 Quick Reference Manual

Hide thumbs Also See for Tribeca 2012:

Table of Contents

Displaying Vehicle Information and Programming Vehicle System Functions

Programming vehicle system functions

You can program the monitor system for certain display items (see below) and answerback beep using the

following procedure:

button and then select

Select or set any of the following items.

Selecting or deselecting this turns the beeps on or off in response to specific

operations performed.

Selecting or deselecting this turns the outside air temperature displayed in the upper

right corner of the map screen on or off.

On display screens other than AUDIO-only, it is possible to display the AUDIO as a

subtitle on the screen. The time display can be set to OFF (no display), 5 sec., 10

sec., or CONT. ON (continuous display). Please select the display time according to

your preference. The initialized setting is 10 sec.

Choose the display time for low fuel and other automatic alarms from 10, 20, and 30

. The display and beep programming screen will appear.

Table of Contents