Subaru Tribeca 2012 Quick Reference Manual page 147

Hide thumbs Also See for Tribeca 2012:

Table of Contents

Displaying Vehicle Information and Programming Vehicle System Functions

This completes the procedure.

• All selections and settings become effective as soon as they are made.

• The monitor system returns to the vehicle information screen when you select

• Setting the windshield wiper deicer is only enabled when your vehicle has the windshield wiper deicer function.

• Interior light extinction delay time can be programmed as follows:

You can program the windshield wiper deicer for two operation modes: continuous

and 15-minute. When the continuous operation mode is programmed, pressing the

windshield wiper deicer switch means that the deicer will continue to function. It will,

however, stop operating automatically if certain conditions are met. (Refer to the

vehicle owner's manual for these conditions.) In the 15-minute mode, the windshield

wiper deicer will automatically shut off after about 15 minutes. You can shut it off

before that time if you push the switch.

Select this key to revert all the three settings you performed on this screen to the

default settings.

After unlocking doors with

keyless entry transmitter

After closing doors

Chapters

Table of Contents