1. Manuals
  2. Brands
  3. Subaru Manuals
  4. Automobile
  5. Tribeca
  6. Owner's manual

Subaru Tribeca Owner's Manual

Hide thumbs Also See for Tribeca:
Table of Contents

Advertisement

Quick Links

See also: Quick Reference Manual
This supplement contains a detailed description
of the Navigation System and instructions for
proper operation. Please read this supplement
carefully before using your navigation system.
Please keep this supplement with your Owner's
Manual and leave it in the vehicle at the time of
resale. The next owner will need the information
it contains.
FUJI HEAVY INDUSTRIES LTD., TOKYO, JAPAN
is a registered trademark of FUJI HEAVY INDUSTRIES LTD.
Copyright © 2006, FUJI HEAVY INDUSTRIES LTD.

Advertisement

Table of Contents
loading

Related Manuals for Subaru Tribeca

Summary of Contents for Subaru Tribeca

  • Page 1 This supplement contains a detailed description of the Navigation System and instructions for proper operation. Please read this supplement carefully before using your navigation system. Please keep this supplement with your Owner’s Manual and leave it in the vehicle at the time of resale.

  • Page 2: Table Of Contents

    Contents Safety Warnings...............3 Route Guidance ..............47 Route Guidance Screen..............47 Before Use ................4 Zoom-in Map at Intersection ............48 System Components and Controls........8 Dual Map Display................49 Starting Up the Navigation System ........10 Freeway Information ..............50 Volume..................12 Replaying Voice Guidance ............50 Compass Mode ................51 Markers and Controls Displayed on Maps ......13 Screens During Route Setting ............13 Route Options ................52...
  • Page 3 Displaying POI data ..................111 Deleting POI markers ..................112 Editing Quick POI categories ................113 SUBARU dealership search................116 ■ SUBARU dealership search from POI ............116 ■ Displaying SUBARU dealership on map ..........118 General Information ............120 ■ Accuracy of vehicle position ..............120 ■ How the vehicle position is detected ............121 ■...

  • Page 4: Safety Warnings

    Safety Warnings You will find a number of WARNINGs, CAUTIONs and NOTEs in this supplement. These safety warnings alert you to potential hazards that could result in injury to you or others. Please read these safety warnings as well as all other portions of this supplement carefully in order to gain a better understanding of how to use your Navigation system safely.

  • Page 5: Before Use

    Before Use WARNING DRIVE SAFELY • Before following an instruction (for example, in the READ THIS MANUAL FIRST case of changing direction) given by the system, Read this supplement carefully before using your check that the action would be safe to take in the navigation system.
  • Page 6 Foreign objects inside the system’s main unit could cause an electric shock or a fire. If the main unit emits smoke or an unusual smell, stop using the system immediately and you contact the nearest SUBARU dealer. STOP OPERATION IN THE EVENT OF A PROBLEM...
  • Page 7 Incorrect operation on rough roads several hours, we recommend that you contact the nearest The system may operate incorrectly or be unable to read the SUBARU dealer. data on the DVD-ROM disc when subjected to severe vibration caused by driving on rough roads.
  • Page 8 Before Use Replacing the DVD-ROM disc If you need to replace the DVD-ROM disc, make sure the replacement disc is compatible with your system’s main unit. Inserting an incompatible disc could damage the unit. ■ Handling precautions for DVD-ROM discs •...

  • Page 9: System Components And Controls

    System Components and Controls z Monitor This button is used to display the destination entry screen of the navigation system. This button is used to display the menu screen of the navigation system. This button is used to switch to the navigation system’s current map screen from any other screen.
  • Page 10 System Components and Controls This button is used to adjust the brightness and contrast of the screen image as well as to display a calendar. Refer to the Owner’s Manual Supplement for Monitor System for further details. . Navigation system main unit ⁄0 Eject button Depressing this button ejects the DVD-ROM disc.

  • Page 11: Starting Up The Navigation System

    Starting Up the Navigation System Use the following procedure to start up the navigation system and display the current map screen. Start the engine. The CAUTION screen will appear, followed by the opening screen.
  • Page 12 Starting Up the Navigation System Carefully read the instructions on the CAUTION screen (cited below), then select CAUTION Make selections only when vehicle is stopped. Watching screen while driving can lead to a serious accident. Some map data may be incorrect. Use judgment and obey traffic rules.

  • Page 13: Volume

    Volume Use this function if you want to change the voice guidance volume setting from the default setting. Press the button or select on the current map screen. Select (Volume). Select the desired key from between (minimum) and (maximum). (off): Select this key to mute the sound.

  • Page 14: Markers And Controls Displayed On Maps

    Markers and Controls Displayed on Maps Screens During Route Setting Touch a point on the map. A crosshair (scroll mark) will appear on the screen. Then touch a desired point on the map. The map will scroll with the selected point at the center. <Current Position screen>...
  • Page 15 Markers and Controls Displayed on Maps 8 “Store memory point” key Stores markers on the map. This key appears just for a few seconds after a map screen is selected. 9 Point of interest (POI) key Allows you to display the POI selection screen (see Page 108).

  • Page 16: Screens During Route Guidance

    Markers and Controls Displayed on Maps Screens During Route Guidance 1 Distance and time to destination Indicates the time (either approximate time required or time of arrival) and the distance to the destination or a waypoint. 2 Route A thick green line indicates the route you should follow. 3 Turn guidance arrow Indicates the direction of your turn at the next intersection/junction as well as the distance to the...

  • Page 17: Menu Screen Keys And Functions

    Menu Screen Keys and Functions <Current map screen> <Menu screen> Press button or select to display the menu screen. Select to return to the current map screen. The table below shows the keys displayed on the navigation menu (NAV. MENU) screen, the functions accessible by selecting these keys, and the pages of this manual that describe the instructions you should follow when using these functions.
  • Page 18 Menu Screen Keys and Functions Menu screen key Function Reference Navigation Set Up User Settings page 71 page Quick POI Selection page 74 Destination Entry Address page 26 Language Selection page 76 Point of Interest page 32 Navigation Information page 77 Select from Map page 35 Calibration...

  • Page 19: Map Operations

    Map Operations Selecting Map Orientation You can select either “heading up” or “north up” display on the current map screen by using the following procedure. Select <“Heading up” display> If you select (“heading up” display), the system rotates the map so that the direction in which you are heading is always directly upwards on the screen (the red arrow points to the north).

  • Page 20: Changing Map Scale

    Map Operations Changing Map Scale You can increase or decrease the scale of the map using the following procedure: Select to change the map scale. button also allows you to change the map scale. Selecting (or operating the button) changes the scale as shown to the left.
  • Page 21 Map Operations NOTE • You can keep selecting (or operating the button) to continually change the map scale. • If you touch an appropriate point on the right side of the scale bar after selecting (operating the button), you can choose directly from any of the five scales.

  • Page 22: Setting Route

    Setting Route Setting Destination Setting destination/waypoints by scrolling the map Even if you do not know the exact address of your destination or a waypoint on your route to the destination, you can set it by scrolling the map as follows: Touch the screen and scroll the map until the crosshair reaches the destination or a waypoint.
  • Page 23 Setting Route Select for setting the destination. The system will calculate the route and display the entire route to the destination on the map. Select for a waypoint. The system will program the address of the waypoint on your route (see Page 86). You can set up to 5 waypoints per trip. Select (start).

  • Page 24: Selecting Route

    Setting Route ■ Selecting route Upon setting the destination, the system prepares to calculate three types of routes to the destination (Quick, Alt., and Short). You can select from any of the three options as follows: Select (3 routes). The system will be ready for calculation of any route you select from the three options, namely, Quick (the fastest route), Alt.

  • Page 25: Setting The Destination From The Navigation Menu

    Setting Route Setting the destination from the navigation menu You can set your destination using a variety of methods if you start setting from the navigation menu screen. Before you can use any of these methods, perform the following steps: Press the button or select Press the...

  • Page 26: Address

    Setting Route Select the method you want to use. (Address)* See Page 26. (Point of Interest)* See Page 32. (Select from Map) See Page 35. (Emergency) See Page 38. (Memory Point) See Page 29. (Previous Destination) See Page 34. (Intersection)* See Page 42.

  • Page 27: Address" Method

    Setting Route ■ “Address” method First, choose either of the two procedures below to follow the “address” method. • Press the button or select , select (destination entry), and then select (address). • Press the button and select (address). Enter a house number using the keypad on the house number input screen and select Enter the street name.
  • Page 28 Setting Route Select (list). Select the desired street from the list. If the same street name exists in more than one city, a list of these cities will be shown. Select the correct city from the list. : Use this key to input the city name from the keypad.
  • Page 29 Setting Route Select (destination) to set the address entered in the above steps as your final destination. The system will calculate the route and display the entire route on the map. Select (waypoint) to set the address entered in the above steps as a waypoint on your route.

  • Page 30: Memory Point" Method

    Setting Route ■ “Memory Point” method If you have saved some locations in the system’s memory, you can make use of an appropriate one to set the destination. First, choose either of the two procedures below to follow the “memory point” method. •...
  • Page 31 Setting Route Select (destination) or (waypoint). NOTE • Select the (destination), (icon), (name), or (date) key to change the sequence in which memory points are displayed. • You cannot use the “Memory Point” method unless there are memory points stored. To store memory points, see Page 89.

  • Page 32: Home" Method Or Method Using Stored Destinations

    Setting Route ■ “Home” method or method using stored destinations If you have stored your home address in the system’s memory, you can use it for your destination or a waypoint. Similarly, if other locations are stored in the memory, they can be conveniently used for quick setting of destination and waypoints.

  • Page 33: Point Of Interest" Method

    Setting Route ■ “Point of Interest” method You can use a selection from the “Point of Interest” listing as your destination or a waypoint. First, choose either of the two procedures below to follow the “point of interest” method. • Press the button or select , select (destination entry), and then select...
  • Page 34 Setting Route Select (destination) or (waypoint). NOTE • If two or more points of interest share the same name, they will both be listed on the screen. Choose an appropriate one from the list. • If there are two or more points of interest with the same name, select (category) or (city) to shorten the list.

  • Page 35: Previous Destination" Method

    Setting Route ■ “Previous Destination” method This method allows you to choose one of the most recently used 100 destinations or waypoints as your new destination or waypoint. First, choose either of the two procedures below to follow the “previous destination” method. •...

  • Page 36: Select From Map" Method

    Setting Route ■ “Select from Map” method You can specify a location on the map that was last displayed and use it for setting the destination or a waypoint. First, choose either of the two procedures below to follow the “select from map” method. •...

  • Page 37: Freeway Entrance/Exit" Method

    Setting Route ■ “Freeway Entrance/Exit” method You can use the name of a freeway entrance or exit selected from the “Freeway Entrance/Exit” list for setting your destination or a waypoint. First, choose either of the two procedures below to follow the “freeway entrance/exit” method. •...
  • Page 38 Setting Route Select (entrance) or (exit). Select the name of the street from which you will enter the freeway or to which you will go after leaving the freeway. : You must select this key before you can enter the street name. : Use this key to search through the list by distance.

  • Page 39: Emergency" Method

    Setting Route ■ “Emergency” method This function allows the nearest police station or hospital to be set as the destination. First, choose either of the two procedures below to follow the “emergency” method. • Press the button or select , select (destination entry), and then select (emergency).
  • Page 40 Setting Route Select (destination) or (waypoint). NOTE Displayed information about each facility might be changed. It is recommended that you check the location or business days/hours before departure.

  • Page 41: Coordinates" Method

    Setting Route ■ “Coordinates” method You can set destinations or waypoints using their latitudes and longitudes as follows: First, choose either of the two procedures below to follow the “coordinates” method. • Press the button or select , select (destination entry), and then select (coordinates).
  • Page 42 Setting Route Select Select (destination) or (waypoint).

  • Page 43: Intersection" Method

    Setting Route ■ “Intersection” method You can use a intersection defined by two street names as a location for setting your destination or a waypoint. First, choose either of the two procedures below to follow the “intersection” method. • Press the button or select , select (destination entry), and then select...
  • Page 44 Setting Route Specify the second street using the same procedure as the first street. Select (destination) or (waypoint). NOTE No intersection is defined if • the two streets do not cross each other, • the two streets are a freeway and a highway, •...

  • Page 45: Phone Number" Method

    Setting Route ■ “Phone number” method This function allows buildings and the like to be located using their phone numbers. First, choose either of the two procedures below to follow the “phone number” method. • Press the button or select , select (destination entry), and then select (phone number).
  • Page 46 Setting Route Select (destination) or (waypoint). NOTE If a number of candidates exist as a result of, for example, different area codes, these will be displayed in a list. Your desired destination can then be selected from the list.

  • Page 47: Using "Change Search Area" Function

    Setting Route ■ Using “Change Search Area” function This function designates a general geographical area where the destination or waypoint you want to set is located. This function can be used in the methods marked with an asterisk (*) on Page 25. First, choose either of the two procedures below to follow the “change”...

  • Page 48: Route Guidance

    Route Guidance Route Guidance Screen During route guidance, the system can indicate on a second screen the directions in which you must make turns at the next and following intersections in either of two ways: “turn arrow” or “turn list”. Specify your preferred method of indication as follows: <Turn arrow>...

  • Page 49: Zoom-In Map At Intersection

    Route Guidance Zoom-in Map at Intersection Before you arrive at an intersection, the system will automatically show a zoom-in map of the intersection on a second screen to make the guidance clearer. As you approach an intersection during route guidance, a zoom-in map of the intersection automatically appears on a second screen.

  • Page 50: Dual Map Display

    Route Guidance Dual Map Display You can configure the screen for a dual map display. <Single map display> <Dual map display> Select (screen configuration). Select (dual map). If you wish to return to the single map display, select (single map). If you need not make any further selection, select .

  • Page 51: Freeway Information

    Route Guidance Freeway Information A list of buildings and facilities along a freeway can be displayed on the screen. Select (screen configuration). Select (freeway information). If you need not make any further selection, select . The relevant keys will disappear. Replaying Voice Guidance If you want to listen to the last voice guidance again during route guidance, use the following procedure: Select...

  • Page 52: Compass Mode

    Route Guidance Compass Mode Longitude and latitude of present location can be displayed on the screen. Select (screen configuration). Select (compass). Longitude and latitude of present location are displayed at lower right of the screen.

  • Page 53: Route Options

    Route Options Setting Route Options Using the functions available from the Route Options screen, you can change the route options, stop the route guidance or check the route. Use the following procedures: Press the button or select Select (route options). The Route Options screen will appear.
  • Page 54 Route Options (destination and waypoint): This function allows you to modify the destination and waypoints, and prompt the system to recalculate the route accordingly. (See Page 57.) (display route): This function allows you to confirm the entire route and, if necessary, prompt the system to recalculate the route according to your specification.

  • Page 55: Search Condition

    Route Options Search condition You can specify the way in which the system calculates your route. Press the button or select , then select (route options), and then select (search condition). Select (Quick), (Alt.), or (Short) to specify the way of calculating the route to reach the next waypoint or the destination from the current point.

  • Page 56: Detour

    Route Options Detour You can specify a detour distance from your current position. The system will calculate an alternative route according to the distance specification, enabling you to take a detour. Press the button or select , then select (route options), and then select (detour).

  • Page 57: Route Preferences

    Route Options Route preferences Use this function to specify preferred route search conditions. The system will start recalculating the route according to your specified conditions. Press the button or select , then select (route options), and then select (route preferences). Specify conditions by selecting keys.

  • Page 58: Destination And Waypoints

    Route Options Destination and waypoints You can change the destination or waypoints for the route calculation by using this function. ■ Addition of waypoints Use the following procedure to add new waypoints to the current route for recalculation. Press the button or select , then select (route options), and then select...
  • Page 59 Route Options Specify the order in which all the set waypoints are to be visited. Choose the location of the waypoint to be added, and then select (add). Select (calculate). NOTE • When a new destination is set using (destination), it will replace the current destination and the route calculation will be carried out again.

  • Page 60: Modifying Destination Or Waypoint Positions

    Route Options ■ Modifying destination or waypoint positions Use this procedure to modify the destination or waypoint positions. The screen will display the calculated route and the positions of the destination or waypoints that you will be able to modify. Press the button or select , then select...
  • Page 61 Route Options Scroll the map to bring the crosshair to the location and then select Select (calculate).

  • Page 62: Modifying Visiting Order

    Route Options ■ Modifying visiting order You can change the order for visiting your waypoints by using this procedure. Press the button or select , then select (route options), and then select destination and waypoints Select (list). Select the waypoint keys according to the order of your visit. If you wish to cancel the visiting order number indication, select (undo).
  • Page 63 Route Options Select Select (calculate).

  • Page 64: Deleting Destination Or Waypoints

    Route Options ■ Deleting destination or waypoints Use this procedure when you wish to delete the previously set destination or waypoint. Press the button or select , then select (route options), and then select destination and waypoints Select (delete). Select the key corresponding to the destination or waypoint you wish to delete.

  • Page 65: Deleting Destination And All Waypoints

    Route Options ■ Deleting destination and all waypoints You can delete the destination and all previously set waypoints in a single process. Press the button or select , then select (route options), and then select destination and waypoints Select (delete all). Confirmation message will be displayed.

  • Page 66: Display Route

    Route Options Display route Use this function to display the entire route. You can also specify an area you wish to avoid and prompt the system to recalculate the route accordingly. Press the button or select , then select (route options), and then select display route Select (turn list).

  • Page 67: Route Preview

    Route Options Route preview The system can show you an automated simulation of the calculated route. Press the button or select , then select (route options), and then select route preview Start the simulation drive according to the calculated route using the keys on the screen as follows: : Move to the start point.

  • Page 68: Setting Conditions For Simulation Drive

    Route Options ■ Setting conditions for simulation drive You can change the simulation drive conditions using this procedure. Press the button or select , then select (route options), and then select route preview Select (edit). The EDIT ROUTE PREVIEW screen will appear. (to destination or next waypoint): The simulation drive will stop at the destination or the next waypoint.
  • Page 69 Route Options If, for example, the (restaurant) category key is selected and a simulation drive is started, your simulation vehicle will then stop at a restaurant on the route. If you then select (information), the system will display information on the restaurant.

  • Page 70: Navigation Setup

    Navigation Setup Setting Your Navigation System Using the functions available from the Navigation Setup screen, you can change the map display conditions and alter the route guidance conditions. Press the button or select Select (navigation setup). The NAVIGATION SET UP screen will appear.

  • Page 71: User Settings

    Navigation Setup Select any of the displayed functions as necessary. This screen consists of two pages. Change the page by using the keys. (user settings): This function allows you to change the screen display and sound settings. (See Page 71.) (quick POI selection): This function allows you to set the point of interest categories that are displayed when you select the menu from the current position screen.

  • Page 72: User Settings

    Navigation Setup User settings You can change the screen display and sound settings using this procedure. Press the button or select , then select (navigation setup), and then select user settings Select the setting item you wish to change. The USER SETTINGS screen consists of three pages. Use the keys to change the screen page when selecting a setting item.
  • Page 73 Navigation Setup Arrival Time: Time of arrival at the destination or a waypoint can be displayed in two different ways: estimated arrival time or remaining driving time. Select for the estimated arrival time display or for the remaining time display. <Estimated arrival time>...
  • Page 74 Navigation Setup Guidance Screen: This function allows you to select or deselect display of guidance messages on the screen. Freeway Information: This function allows you to select or deselect display of guidance messages when driving on freeways.

  • Page 75: Quick Poi Selection

    Navigation Setup Quick POI selection Using this function, you can set the point of interest categories that are displayed when you select the Point of Interest menu key on the current map screen. Set up to six different categories that you use most frequently. (See Page 108 for the method of displaying POI categories on the map and searching for the nearest points of interest.) Press the...
  • Page 76 Navigation Setup Select the subcategories to be displayed on the map. NOTE Repeat Steps 1 to 3 to add more POI categories for display on the menu screen.

  • Page 77: Language Selection

    Navigation Setup Language Selection Use the following procedure to select your preferred language for the menu screens and the voice guidance. Press the button or select , then select (navigation setup), and then select language selection Select your preferred language from the list.

  • Page 78: Navigation Information

    Navigation Setup Navigation information This function allows you to confirm the vehicle signal, the version of the DVD-ROM disc. (See Page 78.) ■ Vehicle signal This function allows certain vehicle data and GPS satellite data to be displayed. Press the button or select , then select (navigation setup), and then select...

  • Page 79: Version

    Navigation Setup ■ Version Use this function to check the version of the DVD-ROM disc you are presently using. Press the button or select , then select (navigation setup), and then select navigation information Select (version). The version of the DVD-ROM disc will be displayed on the screen. Version of the DVD-ROM disc...

  • Page 80: Calibration

    Navigation Setup Calibration This function allows you to correct any display errors in the position and direction of your vehicle on the map display. ■ Adjusting current position and direction Press the button or select , then select (navigation setup), and then select calibration Select (position/direction).
  • Page 81 Navigation Setup to adjust the direction in which you are heading, and then select...

  • Page 82: Distance

    Navigation Setup ■ Distance When selected, this function automatically corrects an error in the current position display that might occur after tire replacement. Press the button or select , then select (navigation setup), and then select calibration Select NOTE You will have to drive about 6 miles (10 km) before the distance correction is complete.

  • Page 83: Set Clock

    Navigation Setup Set clock Since the adjustments for minutes and seconds are made automatically using the time data provided by GPS satellites, you can set your clock by simply performing a time-zone and daylight saving time adjustment using this function. Press the button or select , then select...
  • Page 84 Navigation Setup Select to advance the time by half an hour; select to push back the time by half an hour. NOTE When the clock is adjusted by the “Hour Adjust” button, the all of time-zone switch goes off.

  • Page 85: Restore System Defaults

    Navigation Setup Restore system defaults Use this function if you want to change all of the system’s current settings back to the default settings. Press the button or select , then select (navigation setup), and then select restore system default Select to return all current systems settings to default.

  • Page 86: Search Condition

    Navigation Setup [Default List] Item Initial condition Item Initial condition Map display Color Scheme Search Area US9 (EAST), US2 (WEST) Map Mode Auto Display Guidance Language US English, female Guidance Screen Map Orientation (1 and 2 screen) North up Q-POI Selection A : Gas station Map Display Mode Single-screen display...

  • Page 87: Stored Locations

    Stored Locations You can store, edit, or delete any destinations, waypoints, and other marked points using the procedures described in this section. Press the button or select Select (stored locations). Select the desired item. (Memory Points): Use this function to place markers on the map. (See Page 89.) (Avoid Area): Use this function to store into the system’s memory any areas you want to avoid.
  • Page 88 Stored Locations (Previous Destination): Use this function to delete previously stored destinations and waypoints. (See page 102.) (Preset Destinations): You can program a maximum of five destinations to keys for easy retrieval later on. (See page 104.) (Display memory point icons): Selecting this key allows you to display icons for memory points.
  • Page 89 Stored Locations Editing keys displayed for each function are as follows: Memory Avoid Area Dest. & Way Pt. Points (100) (10) (Destination: 1 Way Point: 5) Previous Dest. Preset Dests. (100) Home (1) The numbers in parentheses following the function names indicate the maximum locations you can store in the memory.

  • Page 90: Memory Points

    Stored Locations Memory points ■ Storing new memory points Memory points can be stored into any of the four categories of storage locations. Press the button or select , then select (stored locations), and then select memory points Select the storage location category for the memory point you wish to add.
  • Page 91 Stored Locations Set the memory point using the preferred method available on the displayed screen. NOTE Up to 100 memory points can be stored. Once that number has been reached, you must delete memory points that you no longer require (see Page 94) before you can store new memory points.

  • Page 92: Reviewing And Modifying Memory Points

    Stored Locations ■ Reviewing and modifying memory points Using this function, you can review the stored memory points in the form of a list on the screen and modify names, icons, telephone numbers, and other memory point data. Press the button or select , then select (stored locations), and then select...
  • Page 93 Stored Locations Select the memory point to be modified. You can change the sequence in which memory points are listed by selecting (distance), (icon), (name), or (date). Select the category key corresponding to the memory point to be modified. (icon): Selecting this key allows you to choose a display icon. of the CHANGE ICON screen contain standard icons, whereas the “With Sound”...
  • Page 94 Stored Locations (category): Use this key to change the storage category. After selecting this key, select the key of the new category. (name): Select this key to change the name of a memory point. When the change has been completed, select (OK).

  • Page 95: Deleting Memory Points

    Stored Locations ■ Deleting memory points You can delete stored memory points by using this function. Press the button or select , then select (stored locations), and then select memory points Select the category of the memory point to be deleted. Select (delete).

  • Page 96: Deleting All Memory Points

    Stored Locations ■ Deleting all memory points Using this function, you can delete all memory points. Press the button or select , then select (stored locations), and then select memory points Select the category of the memory points to be deleted. Select (delete all).

  • Page 97: Modifying Category Names

    Stored Locations ■ Modifying category names Use this function if you want to change the category names - (marked point), (personal), (business), and (entertainment) . Press the button or select , then select (stored locations), and then select memory points Select the category for which the name is to be changed.

  • Page 98: Avoid Area

    Stored Locations Avoid area ■ Storing avoid areas If you use this function to store into the system’s memory the areas you want to avoid, the system will avoid the areas when calculating routes. Press the button or select , then select (stored locations), and then select avoid area Select...
  • Page 99 Stored Locations Select (reduce) or (enlarge). (reduce): Reduces the size of the avoid area. (enlarge): Increases the size of the avoid area. Select (OK). NOTE • Reduce the scale of the map to specify a larger area. • Avoid areas can be set only when the scale of the map is 0.6 mile (1 km) or less.

  • Page 100: Reviewing And Modifying Avoid Areas

    Stored Locations ■ Reviewing and modifying avoid areas Using this function, you can review the stored avoid areas in the form of a list and modify them if necessary. Press the button or select , then select (stored locations), and then select avoid area Select (list).

  • Page 101: Home

    Stored Locations Home ■ Storing home Use this function to store your home location. Press the button or select , then select (stored locations), and then select home Select (add). Move the crosshair to the location of your home and then select (OK).
  • Page 102 Stored Locations NOTE To change your home location, select (list) and then follow the home location storage procedure described above. Select (delete) to delete the stored home location. Refer to “Deleting memory points” on Page 94 for further details on the home deletion methods.

  • Page 103: Previous Destination (Deleting Stored Locations)

    Stored Locations Previous destination (deleting stored locations) Use this function to delete previously set destinations. Press the button or select , then select (stored locations), and then select previous destinations Select (delete). (all delete) is selected, all previously set destinations will be deleted. Select the destination to be deleted.
  • Page 104 Stored Locations Confirmation message will be displayed. Select (yes). Select (no) to cancel the deletion.

  • Page 105: Preset Destinations

    Stored Locations Preset destinations ■ Storing preset destinations Using this function, you can program up to five frequently used destinations to keys for single-action retrieval later Press the button or select , then select (stored locations), and then select preset destinations Select (add).
  • Page 106 Stored Locations Set the location of a preset destination using your preferred method. The method of setting preset destinations is identical to that of setting destinations. Select (OK).

  • Page 107: Reviewing And Modifying Preset Destinations

    Stored Locations ■ Reviewing and modifying preset destinations Using this function, you can review the preset destinations in the form of a list and modify them if necessary. Press the button or select , then select (stored locations), and then select preset destinations Select...
  • Page 108 Stored Locations Select the editing keys appropriate to the item to be modified. For details on the function of each key, refer to “Reviewing and modifying memory points” on Page 91. NOTE The methods for deleting individual and all preset destinations are the same as those described on Page 94 and 95 for memory points.

  • Page 109: Other Functions

    Other Functions Displaying POIs on a map Using this function, you can display POIs on the current map screen. Touch the current map screen. Select (points of interest). Select desired POIs (up to five) using the displayed category keys. For selecting POIs of categories other than the six categories on the screen, select (list categories) and select any POIs from the newly displayed categories.

  • Page 110: Local Search

    Other Functions ■ Local search Touch the current map screen. Select (points of interest). Select (all local points of interest).
  • Page 111 Other Functions Select the POI you want to find from the list of categories. : Use this key to display up to five previous POIs. : Use this key to display the previous POI. : Use this key to display the next POI. : Use this key to display up to five of the next POIs.

  • Page 112: Displaying Poi Data

    Other Functions Displaying POI data You can display the information on a POI, such as the name, address and telephone number. Display the desired POI markers on the current map screen. (See Pages 74 and 108 for the procedure.) Select the POI marker for which you want information by moving the crosshair over it.

  • Page 113: Deleting Poi Markers

    Other Functions Deleting POI markers Use this function when you want to delete any POI markers on the map. Touch the current map screen. Select (point of interest). Select (point of interest off). The marker for the POI will disappear from the map.

  • Page 114: Editing Quick Poi Categories

    Other Functions Editing Quick POI categories Use this function when you want to edit the Quick POI categories on this unit. Select (menu). Select (navigation set up). Select (quick POI selection).
  • Page 115 Other Functions Select the item that you want to edit. (Following procedure show how to change the category from ATM to SUBARU dealership on Quick POI for example.) Select (automotive). Select (SUBARU dealership).
  • Page 116 Other Functions SUBARU dealership bookmarked as (SUBARU dealer) to Quick POI.

  • Page 117: Subaru Dealership Search

    Other Functions SUBARU dealership search ■ SUBARU dealership search from POI First, choose either of the two procedures below to follow the “point of interest” method. • Press the button or select , select (destination entry), and then select (point of interest).
  • Page 118 • Displayed information about a specific facility might not include recent changes. It is recommended that you check the location or business days/hours of a desired point of interest before departure. The system refine the destination search only for SUBARU dealership.

  • Page 119: Displaying Subaru Dealership On Map

    Other Functions ■ Displaying SUBARU dealership on map Touch the current map screen. Select (points of interest). Select (list categories). Select (automotive).
  • Page 120 Other Functions Select (SUBARU dealership) and press (show). The POI marker of SUBARU dealership will appear. Select the SUBARU dealership marker by moving the cross hair over Select (information). The information of SUBARU dealership will be displayed.

  • Page 121: General Information

    General Information ■ Accuracy of vehicle position If the vehicle travels on a road whose actual shape differs from that in the map data, the vehicle’s mark could deviate Area in which GPS signals cannot be received from the actual position. The correct position will eventually Because the radiowave signals from the GPS satellites travel appear on the screen through the correction function.

  • Page 122: How The Vehicle Position Is Detected

    General Information The vehicle’s mark could also deviate even after the Through the use of self-contained navigation, the vehicle’s vehicle has exited the parking area. position can be detected even in an area where the GPS radiowave signals cannot be received. (9) The vehicle’s mark could deviate from its actual position if the vehicle is driven using tire chains or snow tires on Making corrections to the detection of the vehicle’s...

  • Page 123: Accuracy Of The Route Guidance

    General Information ■ Accuracy of the route guidance (12) The system might not output guidance even if the vehicle is driven in reverse on the guided route. The conditions listed below do not indicate a malfunction. (13) The system might not use a local ferryboat even if the (1) The guidance might prompt the driver to drive straight ferry priority is selected.

  • Page 124: When A Problem Occurs

    Confirm whether the problem is due to a minor operational error or a malfunction in the system by referring to the table below before you contact your SUBARU dealer for any repair service. The map does not scroll even when the vehicle is moving.
  • Page 125 General Information Small spots or bright flashes appear on the screen display. This is probably due to the natural characteristics of the liquid There is nothing wrong with the display and no need for crystal display (LCD). concern. The DVD-ROM disc cannot be ejected. The disc might be incompatible or might have been inserted incorrectly.
  • Page 126 NOTE CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Use of controls or adjustments or performance of procedures other These limits are designed to provide reasonable protection against than those specified herein may result in hazardous radiation harmful interference in a residential installation.

Table of Contents