Subaru Tribeca 2012 Quick Reference Manual page 370

! When there are CDs loaded:
Press the preferred disc select button (9),
the disc number indicator of which is
constantly illuminated. The player will then
start playback of the selected CD, begin-
ning with the first track.
If a disc that the player cannot read has
been loaded, "CHECK DISC" will appear
on the display and the player will not play
anything.
! To select a song from its beginning
! Forward direction
Briefly press the " " side of the "TUNE
TRACK" button (2) to skip to the beginning
of the next track. Each time the button is
pressed, the indicated track number will
increase.
NOTE
In an MP3 folder, skipping past the last
track will take you back to the first track
in the folder.
! Backward direction
Briefly press the " " side of the "TUNE
TRACK" button (2) to skip to the beginning
of the current track. Each time the button
is pressed, the indicated track number will
decrease.
NOTE
In an MP3 folder, skipping past the first
track will take you to the last track in
the folder.
! Fast-forwarding and rewinding
! Fast-forwarding
Press and hold the " " side of the "TUNE
TRACK" button (2) to fast-forward the
track.
Release the button to stop fast-forwarding.
NOTE
If you fast-forward to the end of the last
track, fast-forwarding will stop and the
player will start playback beginning
with the first track.
! Rewinding
Press and hold the " " side of the "TUNE
TRACK" button (2) to rewind the track.
Release the button to stop rewinding.
NOTE
If you rewind to the beginning of the
first track, the rewinding will stop and
the player will start playback.
Audio
! Repeating
! To repeat the currently playing track
To repeat a track, briefly press the "RPT"
button (6) while the track is playing. The
display will show "RPT", and the track will
be repeated.
To cancel the track repeat-play mode,
briefly press the "RPT" button twice. The
"RPT" indication will turn off, and the
normal playback mode will be resumed.
NOTE
. Each time you briefly press the
button, the mode will change to the
next one in the following sequence.
If you accidentally press the button and
cancel the track repeat-play mode,
press it again to reselect the repeat-
play mode.
. The repeat-play mode will be can-
celled if you perform any of the follow-
ing steps.
– Press the "RDM" button.
– Press the "SCAN" button.
– Press the " " button.
– Press the disc select button.
– Select the radio mode.
– Press the "RSE AUX" button.
– CONTINUED –
5-23