Ford Focus 2004 Owner's Manual page 140

Roadside emergencies
• Insert the nut key onto the
locking nut (if equipped).
• Slacken the wheel nuts.
• Place the jack with the whole foot
area on firm ground.
The jack must be applied
vertically to the jacking
point.
• Jack up the vehicle until the
wheel is clear of the ground.
• Unscrew and remove the wheel
nuts and take off the wheel.
138
Replacement locks and wheel nuts
can be obtained using the wheel
nut reference number certificate (if
equipped).
Fitting a wheel
Alloy wheels must never be
secured using wheel nuts
for steel wheels.
• Push the wheel onto the wheel
studs. Screw on the wheel nuts and
secure in a clockwise direction
ensuring that the tapered end of
the wheel nuts is facing the wheel.
The wheel nuts of alloy wheels can
also be used for the steel spare
wheel.
• Lower the vehicle and remove the
jack.
• Insert the nut key onto the
locking nut (if equipped).
• Fully tighten the wheel nuts in a
diagonal pattern.