Basic Operation (Tuner); Listening To The Tuner; Preset Memory - Marantz SR7300 User Manual

BASIC OPERATION (TUNER)

LISTENING TO THE TUNER

Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your country's standard is 9 kHz step,
Press TUNER button on the remote more than 6 seconds. Scan step
will change.
Note:
• Preset memory for the tuner will clear by changing this setup.
AUTO TUNING
3. 2. 1.
VOLUME
DOWN
AR MEMORY TUNING F/P MODE
A/B 7.1CH INPUT A/D S-DIRECT MULTIROOM
MUTE
DVD VCR1 DSS/VCR2 AUX1 AUX2 CD-R TAPE CD TUNER
AUX1 INPUT
DIGITAL S-VIDEO VIDEO
(USING THE SR7300)
1.
To select tuner and desired band (FM or AM), press the TUNER
button on the front panel.
2.
F/P button on the front panel to display the frequency.
3.
Press the TUNING or
1 second to start the Auto tuning function.
4.
Automatic searching begins then stops when a station is tuned in.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM), press TUNER
button twice within in two seconds on the remote.
2.
Press 5 5 5 5 5 or 6 6 6 6 6 more than 1 second on the remote.
3.
Automatic searching begins then stops when a station is tuned in.
If tuning does not stop at the desired station, use to the "Manual
tuning" operation.
MANUAL TUNING
3. 2. 1.
VOLUME
DOWN
AR MEMORY TUNING F/P MODE
A/B 7.1CH INPUT A/D S-DIRECT MULTIROOM
MUTE
DVD VCR1 DSS/VCR2 AUX1 AUX2 CD-R TAPE CD TUNER
AUX1 INPUT
DIGITAL S-VIDEO VIDEO
(USING THE SR7300)
1.
To select tuner and desired band (FM or AM), press the TUNER
button on the front panel
2.
Press the F/P(Frequency/Preset) button on front panel, to
appears frequency on the display.
3.
Press the TUNING or
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM), press TUNER
button twice within in two seconds on the remote.
2.
Press 5 5 5 5 5 or 6 6 6 6 6 on the remote to tune in the desired station.
2.
UP
ATT
L AUDIO R
1.
button on the front panel for more than
2.
UP
ATT
L AUDIO R
1.
button.
DIRECT FREQUENCY CALL
1.
1.
To select tuner and desired band (FM or AM), press TUNER
button twice within in two seconds on the remote.
2.
Press the F.DIR on the remote, display will show "FREQ - - - -".
3.
Input your desired station's frequency with ten keypad on the
remote.
4.
The desired station will automatically be tuned.
(FM) TUNING MODE (AUTO STEREO OR MONO)
0
DOWN
CLEAR MEMORY TUNING F/P MODE
SPEAKRS A/B 7.1CH INPUT A/D S-DIRECT MULTIROOM
MUTE
TV DVD VCR1 DSS/VCR2 AUX1 AUX2 CD-R TUNER
TAPE CD
DIGITAL
When in the auto stereo mode, AUTO indicator keeps to light on the
display.
The "ST" indicator lights on when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the "TUNED" and "ST"
indicators turn off.
If the signal is weak, it may be difficult to tune into the station in stereo.
In such a case, press the MODE button on the front panel or press
T.MODE button on the remote.
"AUTO" indicators turn off ,FM stereo broadcasts are received in
monaural and the "ST" indicator turns off.
To return to auto stereo mode, press the MODE button or press T.MODE
button on the remote again. AUTO indicator lights on the display.

PRESET MEMORY

With this unit you can preset up to 50 FM/AM stations in any order.
For each station, you can memorize the frequency and reception
mode if desired.
AUTO PRESET MEMORY
This function automatically scans the FM and AM band and enters all
stations with proper signal strength into the memory.
5. 2. 2.4.
AV SURROUND RECEIVER SR7300
SURROUND
CLEAR MEMORY
SPEAKRS A/B 7.1CH INPUT
SELECT ENTER
TV DVD VCR1 DSS/VCR2
STANDBY
POWER ON/STANDBY PHONES
1.
To select FM , press the TUNER button on the front panel.
2.
While pressing the MEMORY button, press the TUNING
to up.
"AUTO PRESET" will appear on the display, and scanning starts
from lowest frequency.
2.
3.
VOLUME
UP
ATT
AUX1 INPUT
S-VIDEO VIDEO L AUDIO R
3. 1. 3.
2) 1)
VOLUME
DOWN UP
TUNING F/P MODE
A/D S-DIRECT MULTIROOM
MUTE ATT
AUX1 AUX2 CD-R TAPE CD TUNER
AUX1 INPUT
DIGITAL S-VIDEO VIDEO L AUDIO R
button
35