Temporarily Turning Off The Sound; Using The Sleep Timer; Night Mode - Marantz SR7300 User Manual

TEMPORARILY TURNING OFF THE SOUND

CLEAR MEMORY TUNING F/P MODE
SPEAKRS A/B 7.1CH INPUT A/D S-DIRECT MULTIROOM
TV DVD VCR1 DSS/VCR2 AUX1 AUX2 CD-R TAPE CD TUNER
To temporarily silence all speaker outputs such as when interrupted
by a phone call, press the MUTE button on the front panel or MUTE
button on the remote.
This will interrupt the output to all speakers and the head-phone jack,
but it will not affect any recording or dubbing that may be in progress.
When the system is muted, the display will show "MUTE" .
Press the MUTE button again to return to normal operation.

USING THE SLEEP TIMER

To program the SR7300 for automatic standby, press SLEEP buton
on the remote.
Each press of the button will increase the time before shut down in the
following sequence.
OFF 10
90 80
The sleep time will be shown for a few seconds in the display on the
front panel, and it will count down until the time has elapsed.
When the programmed sleep time has elapsed, the unit will
automatically turn off.
Note that the SLEEP indicator on the display will light up when the
Sleep function is programmed.
To cancel the Sleep function, press the SLEEP button until the display
shows to "SLEEP OFF" and the SLEEP indicator disappear.

NIGHT MODE

Press the NIGHT button on the remote to turn on the NIGHT mode.
Selecting the Night Mode ON is effective in Dolby Digital only, and it
compresses the dynamic range.
This softens loud passages such as sudden explosions, to help
prevent disturbing others late at night.
To turn off the Night mode, press the NIGHT button again.
28
VOLUME
DOWN UP
MUTE ATT
AUX1 INPUT
DIGITAL S-VIDEO VIDEO L AUDIO R
20 30
70 60
40
50