Basic Operation (Tuner); Listening To The Tuner; Preset Memory - Marantz SR4500 User Manual

BASIC OPERATION
(TUNER)

LISTENING TO THE TUNER

Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your country's
standard is 9 kHz step, Press TUNER button on
the remote more than 6 seconds. Scan step will
change.
Note:
• Preset memory for the tuner will clear by changing
this setup.
AUTO TUNING
TV VCR1 DSS/VCR2 DVD
2. 1.
1. TUNER CD TAPE CDR/MD
AUX1 AMP
TV MAIN
VOL. SLEEP MUTE VOL.
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MT X 6.1 EQ DIGITAL
L C R
LFE
AAC PCM
SL S SR DOWN
CLEAR MEMO A/D P.SCAN/V OFF
0
URROUND PURE SIMPLE CHANNEL/SKIP
MODE DIRECT SETUP DISPLAY MEMORY CLEAR
MUTE
ENTER
AUTO HT-EQ MENU EXIT BAND T-MODE 2. BASS TREBLE TUNE/SEARCH
T-MODE RDS F.DIRECT
INPUT/DISC+ AUDIO SUB-T/ATT PTY
(Using the SR4500)
1.
To select tuner and desired band (FM or AM),
press the BAND button on the front panel.
2.
Press the or cursor buttons on the front
panel for more than 1 second to start the auto
tuning function.
3.
Automatic searching begins then stops when
a station is tuned in.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
seconds on the remote.
2.
Press the 5 5 5 5 5 or 6 6 6 6 6 for more than 1 second on
the remote.
3.
Automatic searching begins then stops when
a station is tuned in.
If tuning does not stop at the desired station, use
to the "Manual tuning" operation.
30
SR4500U DFU_01_ENG 2_2 Page 30
MANUAL TUNING
TV VCR1 DSS/VCR2 DVD
2. 1.
1. TUNER CD TAPE CDR/MD
AUX1 AMP
TV MAIN
VOL. SLEEP MUTE VOL.
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MT X 6.1 EQ DIGITAL
L C R
LFE
AAC PCM
SL S SR DOWN
CLEAR MEMO A/D P.SCAN/V OFF
0
URROUND PURE SIMPLE CHANNEL/SKIP
MODE DIRECT SETUP DISPLAY MEMORY CLEAR
MUTE
ENTER
AUTO HT-EQ MENU EXIT BAND T-MODE 2. BASS TREBLE TUNE/SEARCH
T-MODE RDS F.DIRECT
INPUT/DISC+ AUDIO SUB-T/ATT PTY
(Using the SR4500)
1.
To select tuner and desired band (FM or AM),
press the BAND button on the front panel
2.
Press the or cursor buttons on the front
panel to select the desired station.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
seconds on the remote.
2.
Press the 5 5 5 5 5 or 6 6 6 6 6 on the remote to tune in the
desired station.
DIRECT FREQUENCY CALL
PURE DIRECT AUTO DTS
1 2 3
3.
NIGHT CSII EX/ES VIRTUAL
4 5 6
POWER
DISPLAY MCH-ST STEREO 7.1CH IN
7 8 9
CLEAR MEMO A/D P.SCAN/V-OFF
TV VCR1 DSS/VCR2 DVD 0
CHANNEL/SKIP
1. TUNER CD TAPE CDR/MD
BASS TREBLE TUNE/SEARCH
AUX1 AMP
2. T-MODE RDS F.DIRECT
TV MAIN
VOL. SLEEP MUTE VOL.
INPUT/DISC+ AUDIO SUB-T/ATT PTY
CH.SEL LIP.SYNC
OSD MENU
SYSTEM REMOTE CONTROLLER
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within two
seconds on the remote.
2.
Press the F.DIRECT on the remote, display will
show "FREQ - - - -".
3.
Input your desired station's frequency with the
numeric buttons on the remote.
4.
The desired station will automatically be tuned.
(FM) TUNING MODE (AUTO STEREO OR MONO)
VOLUME
T-MODE RDS F.DIRECT
SURROUND
GHT PEAK ATT ANALOG
DIGITAL DIGITAL
EQ INPUT/DISC+ AUDIO SUB-T/ATT PTY
L C R
AAC PCM LFE
SL S SR
DOWN UP
CH.SEL LIP.SYNC
DISPLAY MEMORY CLEAR
MUTE ATT
SYSTEM REMOTE CONTROLLER
RC5500SR
R
EXIT BAND T-MODE
When in the auto stereo mode, AUTO indicator will
be illuminated on the display.
The "ST" indicator is illuminated when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
"TUNED" and "ST" indicators are not illuminated.
If the signal is weak, it may be difficult to tune into the
station in stereo. In such a case, press the T-MODE
button on the front panel or remote.
"AUTO" indicator is not illuminated, if FM stereo
broadcasts are received in monaural and the "ST"
indicator is not illuminated.
To return to auto stereo mode, press the T-MODE
button or press T-MODE button on the remote again.
AUTO indicator is illuminated on the display.

PRESET MEMORY

With this unit you can preset up to 50 FM/AM stations
in any order.
For each station, you can memorize the frequency
and reception mode if desired.
AUTO PRESET MEMORY
This function automatically scans the FM and AM
band and enters all stations with proper signal
strength into the memory.
2. 4. 2. 5. 1. 3.
AV SURROUND RECEIVER SR4500
INPUT SELECTOR VOLUME
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
DIGITAL DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 EQ
L C R
AAC PCM LFE
SL S SR
DOWN UP
SURROUND PURE SIMPLE
MODE DIRECT SETUP DISPLAY MEMORY CLEAR
7.1CH INPUT S. SPEAKER B MUTE ATT
STANDBY ENTER
AUTO HT-EQ MENU EXIT BAND T-MODE
POWER ON/STANDBY PHONES
04.6.25, 11:09 AM Adobe PageMaker 6.5J/PPC
1.
To select FM , press the BAND button on the
front panel.
2.
While pressing the MEMO button, press the
cursor button.
"AUTO PRESET" will appear on the display,
and scanning starts from the lowest frequency.
3.
Each time the tuner finds a station, scanning
will pause and the station will be played for five
seconds.
During this time, the following operations are
possible.
The band can be changed by the BAND button.
4.
If no button is pressed during this period, the
current station is memorized in location Preset
02.
If you wish to skip the current station, press the
cursor button during this period, this station
is skipped and auto presetting continues.
5.
Operation stops automatically when all 50
preset memory positions are filled or when
auto scanning attains the highest end of all
bands. If you desire to stop the auto preset
memory at anytime, press the CLEAR button.
MANUAL PRESET MEMORY
3. 2. 4.
ENTER
SET UP/ MENU OFF
T.TONE
RECEIVER SR4500
PURE DIRECT AUTO DTS
1 2 3
3.
NIGHT CSII EX/ES VIRTUAL
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 EQ DIGITAL 4 5 6
L C R
LFE
AAC PCM
SL S SR
DISPLAY MCH-ST STEREO 7.1CH IN
7 8 9
2.
CLEAR MEMO A/D P.SCAN/V-OFF
SURROUND PURE SIMPLE
MODE DIRECT SETUP DISPLAY MEMORY
0
R B
CHANNEL/SKIP
ENTER
AUTO HT-EQ MENU EXIT BAND
S
BASS TREBLE TUNE/SEARCH
T-MODE RDS F.DIRECT
(Using the SR4500)
1.
Tune into the radio station you desire (Refer to
the "MANUAL TUNING" or "AUTO TUNING"
section).
2.
Press the MEMO button on the front panel. "– –"
(preset number) starts blinking on the display.
3.
Select the preset number by pressing the or
cursor buttons, while this is still blinking
(approx. 5 seconds)
4.
Press the MEMO button again to enter. The
display stops blinking.
The station is now stored in the specified
preset memory location.