Multi Room System; Multi Room Playback Using The Multi Room Out Terminals; Operation To Multi Room Outputs With The Remote Controller From Second Room - Marantz SR7300 User Manual

MULTI ROOM SYSTEM

The Multi Room system is a function which allows you to listen to the
same or a different source in a room other than the room in which the
SR7300 is located.
To use this function, a multi room remote unit and remote control
signal receiver available from your Marantz dealer are necessary.
The operations possible with the multi room function are explained
briefly below.
For details, refer to the instruction manual supplied with the multi room
remote control unit and receiver.
When the outputs of the MULTI ROOM OUT terminals are wired and
connected to amplifiers installed in other rooms , different sources
can be played in rooms other than the main room in which this unit and
the playback devices are installed.
SR7300 has some feature to MULTI ROOM SYSTEM as source
selector, OSD information, sleep timer and remote control.
MULTI ROOM PLAYBACK USING THE
MULTI ROOM OUT TERMINALS
The SR7300 is equipped with audio pre-out terminals for which the
volume is adjustable and composite video output terminals as the
MULTI ROOM output terminals.
A separately sold stereo power amplifier (SM6100) can be connected
to enjoy multi room playback.
Operation to MULTI ROOM OUT without the remote controller.
2.
AV SURROUND RECEIVER SR7300
SURROUND
CLEAR
SPEAKRS A/B
SELECT ENTER
TV TV
STANDBY
POWER ON/STANDBY PHONES
1.
Press the MULTI ROOM button. The unit enters multi room mode
and the display indicates "SELCT SOURCE" and flashes the
"MULTI" indicator for approx. 10 seconds.
2.
In this time, you can select the input source by pressing the input
selector buttons.
Then, the display indicates "MULTI VOL" "VOLUME xx dB" for
approx. 5 seconds.
3.
During this time, you can set the volume level in the multi room as
desired.
This will only set the volume in the second room.
38
1. 2.
VOLUME
DOWN
MEMORY TUNING F/P MODE
7.1CH INPUT A/D S-DIRECT MULTIROOM
MUTE
DVD DVD VCR1 VCR1 DSS/VCR2 DSS/VCR2 AUX1 AUX1 AUX2 AUX2 CD-R CD-R TAPE TAPE CD CD TUNER TUNER
AUX1 INPUT
DIGITAL S-VIDEO VIDEO
OPERATION TO MULTI ROOM OUTPUTS
WITH THE REMOTE CONTROLLER FROM
SECOND ROOM.
1.
Press the MULTI on multi room remote control unit from the
MULTI ROOM.
This operations will put the SR7300 into multi room mode and
"MULTI" will light in the display.
MULTI ROOM Video output will show OSD information to
condition of MULTI ROOM setup.
UP
ATT
L AUDIO R
2.
Press the VOL.
control unit to set the desired sound volume.
3.
In multi room mode, the multi room remote control unit can be
used in the multiroom to operate the following functions.
General:
• Controlling volume level, sleep timer, and muting. Selecting
input audio and video source.
Tuner:
• Selecting band, controlling preset channel up and down, tuning
up and down, direct frequency call.
Notes for multi room system:
• The MULTI ROOM OUT is analog outputs.
This is not support to digital signals input.
• If Tuner (FM or AM) is active in main room, you can not
control any function of tuner.
In this case, you can listen the same condition as main room.
2.
1.
MU L T I ROOM
MU L T I ROOM : O F F
V I D EO : D V D
A UD I O : D V D
V O L UME S E T U P : V AR I AB L E
V O L UME L E V E L : - 9 0 d B
S L E E P T I ME R : O F F
- - - - MA I N - ROOM S T A T U S - - - -
V I D EO : D V D AUD I O : D V D
MA I N
or VOL. button on the multi room remote
E X I T