Table of Contents
Advertisement
Click Add and the page for defining the IP filtering rule appears.
In this page, you can create a filter rule to identify outgoing IP traffic by specifying a
new filter name and at least one condition. All specified conditions in the filtering
rule must be complied with the rule to take effect.
Click Save/Apply to save and activate the filter.
Source IP address: Enter an IP address. After you set the IP address,
outgoing packets (protocol selected packets) are blocked.
Source port: UPD/TCP source port or a range of ports.
Destination port: UPD/TCP destination port or a range of ports.
Configuration
Step 1 By default, all outgoing IP traffic from LAN is allowed.
Step 2 The following page shows the detailed configuration.
54
Advertisement
Table of Contents
