Step 2
Select the use Interface like that ipoa_0_0_35/ipoa0 and select a service
or enter a custom server.
Step 3
Set Server IP Address.
Step 4
Enter the Server IP address of the computer that provides the service
(the server in the Local Host field). Note that unless an additional
external IP address is added, only one LAN computer can be assigned
to provide a specific service or application.
Step 5
Set External Port Start and External Port End.
Step 6
Select Protocol.
Step 7
Set Internal Port Start and Internal Port End.
Step 8
Enter Remote IP.
Step 9
Click Apply/Save to apply the settings.
If the application you require is not in the list, manually enter the information.
52