Table of Contents
Advertisement
Step 2
Select the use Interface like that ipoa_0_0_35/ipoa0 and select the
required application from the Select an application drop-down list, or
manually enter the information in the Custom application field.
Trigger Port Start and Trigger Port End: Enter the port that is to be
monitored for outgoing data traffic.
Trigger Protocol: Select the protocol that is to be monitored for outgoing
data traffic.
Open Protocol: Select the protocol that is to be allowed for incoming data
traffic
Open Port Start and Open Port End: Enter the port that is to be opened for
incoming traffic.
Note: You can use a single port number, several port
numbers separated by commas, port blocks consisting of
two port numbers separated by a dash, or any combination
of these, for example 80, 90-140, 180.
Step 3
Click Save/Apply to apply the settings.
Removing Port Triggering
50
Advertisement
Table of Contents
