Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Using the mydlink SharePort™ app for iPad®, DSL ..................78 iPhone®, and iPod touch® ..........22 ATM ..................79 Main Menu ...............27 PTM ..................80 Documents ...............28 IPv6 ..................81 Pictures ................30 Wireless ..................95 Videos.................32 Guest Zone ...............97 Music ..................34 Network ..................98 Folders ................37 D-Link DSL-4320L User Manual...
Page 4
System Log ................. 116 Admin .................. 117 Technical Specifications ..........150 System ................119 Upgrade ................120 Statistics ................121 Connect a Wireless Client to your Router ....122 WPS Button ................122 Windows® 8 ................123 WPA/WPA2 ................. 123 D-Link DSL-4320L User Manual...
Power Adapter If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DSL-4320L will cause damage and void the warranty for this product.
• Internet Explorer 9 or higher mydlink Requirements • Firefox 20 or higher • Safari 5.1 or higher • Chrome 25 or higher iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Android is a trademark of Google, Inc. D-Link DSL-4320L User Manual...
Lite app – which is great for parents. SharePort technology lets you take advantage of the USB 3.0 port found on the back of your DSL-4320L (as well as an additional USB 2.0 port). Plug in a USB storage drive and you can use the mydlink SharePort™ app for iPad®, iPhone®, iPod touch®, and Android™...
• Cloud Features - The DSL-4320L is mydlink-enabled so you can remotely access and mange your DSL-4320L from a mobile device using the mydlink Lite app. The mydlink SharePort™ app can be used to share files, stream videos, view photos, and play music.
Section 1 - Product Overview Antenna Setup The DSL-4320L is designed to give you the fastest, most stable network connection possible. In order to maximize performance, orient the antennas at an angle, pointing outward and away from the base unit.
Gigabit LAN Ports (1-4) Connect Ethernet devices such as computers, switches, storage (NAS) devices and game consoles. Power Button Press the power button to power on and off. Power Connector Connector for the supplied power adapter. D-Link DSL-4320L User Manual...
A solid green light indicates that the 5 GHz wireless band is enabled. DSL LED A solid green light indicates a proper connection to a DSL enabled telephone line. Internet LED A solid green light indicates a proper connection to a broadband service. D-Link DSL-4320L User Manual...
Note: This installation section is written for users who are setting up their home Internet service with the DSL-4320L TAIPAN AC3200 Ultra Wi-Fi Modem Router for the first time. If you are replacing an existing DSL modem and/or router, you may need to modify these steps.
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.
Caution: - To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Telephone Outlet LINE PHONE Microfilter Connect the Phone cable from the DSL port on the Microfilter to the ADSL port of the modem router. Microfilter Phone Cable DSL-4320L D-Link DSL-4320L User Manual...
Page 15
Section 2 - Installation connect the Ethernet cable from a LAN port of the DSL-4320L to the If you wish to use a wired connection, Ethernet port on your computer. DSL-4320L Computer Ethernet Cable Plug the power adapter into your modem router and connect to an available power outlet or surge protector.
Page 16
Press the power button and verify that the power LED is lit. Allow 1 minute for the router to boot up. If connecting to the DSL-4320L wirelessly, access the wireless utility on your computer or mobile device. Scan for available Wi-Fi networks (SSID). Select and join a Wi-Fi network and use the password which corresponds to the information on the supplied Wi-Fi Configuration Card.
There are two ways you can configure your router to connect to the Internet and connect to your clients: • D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to page "Setup Wizard"...
IP address of the router (default: http://192.168.1.1). The wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. Ensure that your DSL phone cable is connected to both the router and the wall jack.
Page 19
If the router detected or you selected PPPoE, enter your PPPoE username and password and click Next to continue. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. D-Link DSL-4320L User Manual...
Page 20
Note: Make sure to remove your PPPoA software from your computer. The software is no longer needed and will not work through a router. If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. D-Link DSL-4320L User Manual...
Page 21
Click Next to continue. Create a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network. Click Next to continue. D-Link DSL-4320L User Manual...
Page 22
Click Next to continue. The Summary window will display your settings. Click Next if you are satisfied, or click Back to make changes to them. D-Link DSL-4320L User Manual...
Page 23
No if you want to create one. Click Next to continue. If you do not want to register at this time, click Skip. If you clicked Yes, enter your mydlink account name (email address) and password. Click Next to register your mydlink account with the router. D-Link DSL-4320L User Manual...
Page 24
If you clicked No, fill out the requested information and click Next to create your mydlink account. At the end of the wizard, you will be presented with a final summary of your settings. Click Finish to close the wizard. D-Link DSL-4320L User Manual...
Page 25
(iOS 6.0 or higher), or Android device (2.3 or higher). To download the "mydlink Lite" app, visit the Apple Store, Android Market or http://mydlink.com/Lite. PC and Mac users can use the mydlink portal at http://mydlink.com. D-Link DSL-4320L User Manual...
Streaming performance will vary depending on the quality of your Internet connection. If you choose to skip the mydlink SharePort registration during the initial setup of your DSL-4320L, you may begin the registration process anytime by accessing the mydlink SharePort feature from within the router configuration menu. Refer to page 102 for details on how to begin the mydlink shareport registration process.
Page 27
Account Login information when the pop-up displays. Tap Done when your information is entered. (The Admin password is only for local access, if you can connect through the Internet, then you can leave the Admin password blank) D-Link DSL-4320L User Manual...
Page 28
Note: A red wireless icon indicates that your router’s network environment may not be optimal for streaming media and you may experience slow downs or otherwise degraded performance. D-Link DSL-4320L User Manual...
Page 29
Wi-Fi settings. Locate the Wi-Fi name (SSID) and password for your device as printed on the included Wi-Fi Configuration Card. 4. Tap the mydlink SharePort icon, and the app will load. D-Link DSL-4320L User Manual...
Page 30
Note: A red wireless icon indicates that your router’s network environment may not be optimal for streaming media and you may experience slow downs or otherwise degraded performance. D-Link DSL-4320L User Manual...
Tap on the movie icon to play videos. Tap on the music icon to play audio files. Tap on the folder icon to browse all files in a folder view. Tap on the star icon to access your favorite files. D-Link DSL-4320L User Manual...
Section 3 - Getting Started Documents The Documents section allows you to share, print, and view documents streamed from your DSL-4320L to your mobile device. Tap the document icon on the main menu to browse the documents on your mobile device.
Page 33
Tap on a file to start the document viewer. In the viewer: Tap to add/remove the file from your Favorites. Tap to bring up the same options as >. Note: Some files may require a third-party app to view them. D-Link DSL-4320L User Manual...
Section 3 - Getting Started Pictures The Pictures section allows you to stream images from your DSL-4320L to your mobile device. Tap the camera icon on the main menu to browse your photo collection on your removable storage. Search Bar: Enter a filename here to search your storage.
Page 35
Section 3 - Getting Started Tap on a file to start the photo viewer. In the viewer: Tap to add/remove the current image from your Favorites. Tap to start the slideshow. Tap to bring up the same options as >. D-Link DSL-4320L User Manual...
Section 3 - Getting Started Videos The Videos section allows you to stream video clips and movies from your DSL-4320L to your mobile device. Tap the movie icon on the main menu to browse your videos on your removable storage. Search Bar: Enter a filename here to search for a specific file.
Page 37
Tapping this icon gives you additional options: • Mail: Lets you e-mail the video. • iCloud: Lets you store the video on iCloud. • Open In...: Lets you use a third-party app to open the file. D-Link DSL-4320L User Manual...
Section 3 - Getting Started Music The Music section allows you to stream songs from your DSL-4320L to your mobile device. Tap the music icon on the main menu to browse your music collection on your removable storage. Search Bar: Enter a filename here to search your storage.
Page 39
Tap to enable/disable shuffle mode. To create a playlist: •Tap Edit > Add Playlist. •Enter a name for the playlist, then tap Save. •The name of the playlist will appear in the browser next to the icon. D-Link DSL-4320L User Manual...
Page 40
•Tap Add Music... to add songs to the current playlist. •Tick the songs you wish to add and tap Done. To delete songs from the playlist: •Tap Edit in the playlist browser and mark the files to be deleted. •Tap Delete. D-Link DSL-4320L User Manual...
The bottom menu bar includes these options: Tap to go back to the main menu. Tap to upload files from your device to your removable storage. Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DSL-4320L User Manual...
Page 42
•Browse to the directory you wish to create a new folder in. •Tap Edit at the top right. •Tap Add Folder to add a new folder. •Enter the name of the new folder, then tap Save. •Tap OK to confirm folder creation. D-Link DSL-4320L User Manual...
•Tap Done. During the upload process, the size of the file and the upload progress will be displayed. To upload more files, tap the + icon at the top right and repeat the steps listed above. D-Link DSL-4320L User Manual...
Tap on a file to start the file viewer. In the viewer: Tap to add/remove the file from your Favorites. Tap to bring up additional options. Note: The file options available will vary depending on the file type. D-Link DSL-4320L User Manual...
Streaming performance will vary depending on the quality of your Internet connection. Note: If you choose to skip the mydlink SharePort registration during the initial setup of your DSL-4320L, you may begin the registration process anytime by accessing the mydlink SharePort feature from within the router configuration menu. Refer to page 102 for details on how to begin the mydlink shareport registration process.
Page 46
Account Login information when the pop-up displays. Tap Apply when your information is entered. (The Admin password is only for local access, if you can connect through the Internet, then you can leave the Admin password blank) D-Link DSL-4320L User Manual...
Page 47
Note: A red wireless icon indicates that your router’s network environment may not be optimal for streaming media and you may experience slow downs or otherwise degraded performance. D-Link DSL-4320L User Manual...
Page 48
3. On your mobile device, go to your Wi-Fi settings and connect to your router’s wireless network using the default Wi-Fi settings. Locate the Wi-Fi name (SSID) and password for your device as printed on the included Wi-Fi Configuration Card. DSL-4320L D-Link DSL-4320L User Manual...
Page 49
Local Access connection. Note: A red wireless icon indicates that your router’s network environment may not be optimal for streaming media and you may experience slow downs or otherwise degraded performance. D-Link DSL-4320L User Manual...
Tap on the folder icon to browse all files in a folder view. Tap on the star icon to access your favorite files. Note: Available features may differ depending on the Android OS version of your device. D-Link DSL-4320L User Manual...
Section 3 - Getting Started Documents The Documents section allows you to share, print, and view documents streamed from your DSL-4320L to your mobile device. Tap the document icon on the main menu to browse the files on your mobile device.
Page 52
•Tap the screen to bring up zoom in/out buttons. •Drag the screen up or down to scroll between pages. •Tap to perform File, Find, Zoom, Reading View, Go To Page, and Bookmarks actions. Note: Available actions may differ depending on your Android OS. D-Link DSL-4320L User Manual...
Section 3 - Getting Started Pictures The Pictures section allows you to view images streamed from your DSL-4320L to your mobile device. Tap the camera icon on the main menu to browse your photo collection on your removable storage. Search Bar: Type in the name of a file to search for it.
Page 54
Tap to delete the current image. Tap OK to confirm. Tap to bring up additional options using other applications. Tap to access the image editor. Note: This function may vary depending on the version of your Android OS. D-Link DSL-4320L User Manual...
Section 3 - Getting Started Videos The Videos section allows you to stream video clips and movies from your DSL-4320L to your mobile device. Tap the movie icon on the main menu to browse your videos on your removable storage. Search Bar: Type in the name of a file to search for it.
Page 56
Tap on a file to start playing it. Tap on the screen to bring up the scroll bar, pause button, and play button. Tap to resume playback. Tap to pause the video. Note: Available features may vary depending on the Android OS version installed on your device. D-Link DSL-4320L User Manual...
Section 3 - Getting Started Music The Music section allows you to stream songs from your DSL-4320L to your mobile device. Tap the music icon on the main menu to browse your music collection on your removable storage. Search Bar: Type in the name of a file to search for it.
Page 58
•Tap Add new playlist... •Enter a name for the playlist, then tap OK. The name of the playlist will appear in the browser next to the icon. •You can tap then to refresh the playlist page. D-Link DSL-4320L User Manual...
Page 59
•Tick the songs you wish to add and tap to save. To delete songs from the playlist: •Tap Edit in the playlist browser and mark the files to be deleted. •Tap then tap OK to confirm. D-Link DSL-4320L User Manual...
Tap to return to the main menu. Tap to access file options. In the file browser: Tap to return to the main menu. Tap to upload files. Tap to refresh, sort, create a new folder, or mark files for deletion and copying. D-Link DSL-4320L User Manual...
Page 61
Tap OK to confirm. Tap on To copy files: Tap on to select files for copying. Tick the box next to each file for copying. Tap on to browse to the destination. D-Link DSL-4320L User Manual...
Page 62
•You can also tap New Folder if you wish to create a folder in the current directory. To create a new folder: •Browse to the directory you wish to create a new folder in. •Tap then •Enter the name of the folder in the box, then tap OK. D-Link DSL-4320L User Manual...
Page 63
•Tap Upload. During the upload process, the size of the file and the upload progress will be displayed under the file name. To remove a file from the upload queue, tap the X next to it. D-Link DSL-4320L User Manual...
Tap to return to the main menu. Tap to update the list of files. Tap to sort the files by name, size, type, or date. Check a file then tap to delete it. D-Link DSL-4320L User Manual...
The bar at the top of the page has quick access to Settings and Management functions. You may quickly jump back Home at any time. Note: The system will automatically log out after a period of inactivity. D-Link DSL-4320L User Manual...
Click IPv4 or IPv6 to see details of the IPv4 connection and IPv6 connection respectively. Click Release to disconnect from the Internet. If you do this and wish to reconnect, click Renew. To reconfigure the Internet settings, refer to "Internet" on page 62. D-Link DSL-4320L User Manual...
Section 4 - Configuration DSL-4320L Click on the DSL-4320L icon to view details about the router and its wireless settings. Here you can see the router’s current wireless settings, as well as its MAC address and IPv4/IPv6 addresses. To reconfigure the network settings, either click Go to settings on the lower left, or click Settings (at the top of the page) and then Network on the menu that appears.
Click on the Connected Clients icon to view details about the router and its wireless settings. On this page you can see all the clients currently connected to the router, and their IP addresses. To edit each client’s settings, click the pencil icon on the client you want to edit. D-Link DSL-4320L User Manual...
Page 69
Enter a specific IP address for this client. IP Address: Enable to reserve this IP address for this client. Reserve IP: Allow or Block access to the router. Parental Control: Click Save when you are done. D-Link DSL-4320L User Manual...
If you have a USB device connected, you can see its name and how much free space it has. To configure your SharePort settings, click Go to settings and refer to page 100 for more information. D-Link DSL-4320L User Manual...
To configure the ATM settings, click the ATM link. Refer to ATM on page 79. To configure the PTM settings, click the PTM link. Refer to PTM on page 80. To configure an IPv6 connection, click the IPv6 link. Refer to IPv6 on page 81. D-Link DSL-4320L User Manual...
Page 72
For PPPoE refer to PPPoE on page 71. For PPPoA refer to PPPoA on page 72. For PPTP refer to PPTP on page 73. For L2TP refer to L2TP on page 75. For Bridge refer to Bridge on page 77. D-Link DSL-4320L User Manual...
The default MAC address is set to the Internet port’s physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DSL-4320L User Manual...
Page 74
The default MAC address is set to the Internet port’s physical interface Clone: MAC address on the router. You can use drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DSL-4320L User Manual...
Page 75
Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DSL-4320L User Manual...
Page 76
Enter the IP address provided by your ISP (Static IP only). Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. Server: Click Save when you are done. D-Link DSL-4320L User Manual...
Page 77
Enter the subnet mask provided by your ISP (Static IP only). Mask: PPTP Gateway Enter the gateway IP address provided by your ISP (Static IP only). IP Address: Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: D-Link DSL-4320L User Manual...
Page 78
Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DSL-4320L User Manual...
Page 79
Enter the subnet mask provided by your ISP (Static IP only). Mask: L2TP Gateway Enter the gateway IP address provided by your ISP (Static IP only). IP Address: Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: D-Link DSL-4320L User Manual...
Page 80
Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DSL-4320L User Manual...
Page 81
Section 4 - Configuration Bridge Choose Bridge to configure the device as a network bridge. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. D-Link DSL-4320L User Manual...
On this page you can configure your DSL settings. If you are unsure, you can obtain these settings from your ISP. Select whether to enable or disable each DSL modulation option. Modulation: Usually it is best to leave these at their defaults, unless otherwise instructed by your ISP. Click Save when you are done. D-Link DSL-4320L User Manual...
Select the latency from the drop-down menu. Encapsulation: Select the method of encapsulation provided by your ISP. You can select LLC or VCMUX. ATM QoS: Select the Quality of Service type from the drop-down menu. Click Save when you are done. D-Link DSL-4320L User Manual...
On this page you can configure your Packet Transfer Mode (ATM) settings. If you are unsure, you can obtain these settings from your ISP. Interface: Select the PTM interface from the drop-down menu. Latency: Select the latency from the drop-down menu. D-Link DSL-4320L User Manual...
For IPv6 in IPv4 Tunnel refer to IPv6 in IPv4 Tunnel on page 89. For 6 to 4 refer to 6 to 4 on page 91. For 6rd refer to 6rd on page 92. For Local Connectivity Only refer to Local Connectivity Only on page 94. D-Link DSL-4320L User Manual...
Enable or disable automatic DHCP-PD services. DHCP-PD in LAN: Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Type: DHCPv6. Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DSL-4320L User Manual...
LAN IPv6 Enter the LAN (local) IPv6 address for the router. Address: LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: Enable Check to enable the Automatic IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: D-Link DSL-4320L User Manual...
Page 88
Section 4 - Configuration Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Type: DHCPv6. Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DSL-4320L User Manual...
Page 89
LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: Enable Enable or disable the Automatic IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: Enable Enable or disable automatic DHCP-PD services. Automatic DHCP-PD in LAN: D-Link DSL-4320L User Manual...
Page 90
Section 4 - Configuration Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Type: DHCPv6. Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DSL-4320L User Manual...
Page 91
If you selected Use the following DNS address above, enter the Server: primary DNS server address. If you selected Use the following DNS address above, enter the Secondary DNS Server: secondary DNS server address. Enable DHCP- Enable or disable prefix delegation services. D-Link DSL-4320L User Manual...
Page 92
/63. Contact your ISP for more information. Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DSL-4320L User Manual...
If you selected Use the following DNS address above, enter the Secondary DNS Server: secondary DNS server address. Enable DHCP- Enable or disable prefix delegation services. LAN IPv6 If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the Address: router. D-Link DSL-4320L User Manual...
Page 94
Enable or disable automatic DHCP-PD services. Automatic DHCP-PD in LAN: Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6. Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DSL-4320L User Manual...
Page 95
Check to enable the Automatic IPv6 Address Assignment feature. Assignment: Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Autoconfiguration Type: DHCPv6. Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DSL-4320L User Manual...
Page 96
Enter the 6rd border relay IPv4 address settings supplied by your ISP 6rd Border Relay IPv4 (manual configuration only). Address: Enter the LAN (local) IPv6 address for the router. LAN IPv6 Address: LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: D-Link DSL-4320L User Manual...
Page 97
Check to enable the Automatic IPv6 Address Assignment feature. IPv6 Address Assignment: Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Type: DHCPv6. Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DSL-4320L User Manual...
Page 98
ULA Prefix: If you wish to choose your own ULA prefix, enter it here. Current IPv6 This section will display the current settings for your IPv6 ULA. ULA Settings: Click Save when you are done. D-Link DSL-4320L User Manual...
5 GHz wireless frequency bands: Smart Connect: Enable this option to have the DSL-4320L automatically manage the 2.4 Ghz and 5 Ghz wireless networks. Disable this option if you want to manually configure the 2.4 Ghz and 5 Ghz wireless networks.
Page 100
The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 115 for more information. Click Save when you are done. D-Link DSL-4320L User Manual...
Internet Access Enabling this option will confine connectivity to the Internet, Only: disallowing guests from accessing other local network devices. Click Save when you are done. D-Link DSL-4320L User Manual...
Enter the starting and ending IP addresses for the DHCP server’s IP Address Range: assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. D-Link DSL-4320L User Manual...
Page 103
Enable to allow IPv4 multicast traffic to pass through the router from Stream: the Internet. IPv6 Multicast Enable to allow IPv6 multicast traffic to pass through the router from Stream: the Internet. Click Save when you are done. D-Link DSL-4320L User Manual...
FTP. If this is enabled, enter the Remote FTP Port, Maximum Users, Login Timeout, and the Maximum Idle Time. Click Save when you are done. To manage user accounts for SharePort access, click Create User and refer to the next page for details. D-Link DSL-4320L User Manual...
Browse and browse to the desired folder. Click OK when you are done. The new user should be added to the list of user accounts. To save the new list, click Save. To return to the SharePort page, click SharePort. D-Link DSL-4320L User Manual...
If you already have a mydlink account, click Yes, I have a mydlink account. Enter your email address (which is also your username) and your password. Then, click Sign In to register your existing mydlink account with your router. D-Link DSL-4320L User Manual...
If you want to remove a priority assignment from a device and return it to the All Devices list, click the cross icon in the top right of the device card. Click Save when you are done. D-Link DSL-4320L User Manual...
Checking: IPv6 Simple Enable or disable IPv6 simple security. Security: IPv6 Ingress Enable or disable IPv6 ingress filtering. Filtering: PPTP: Allows multiple machines on the LAN to connect to their corporate network using the PPTP protocol. D-Link DSL-4320L User Manual...
Page 109
NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link DSL-4320L User Manual...
The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 115 for more information. Click Apply when you are done. D-Link DSL-4320L User Manual...
Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to 115 for more information. Click Apply when you are done. D-Link DSL-4320L User Manual...
The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 115 for more information. Click Apply when you are done. D-Link DSL-4320L User Manual...
Create New Rule. Next, under Website URL/Domain enter the URL or domain. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain. Click Save when you are done. D-Link DSL-4320L User Manual...
A value 1 is the lowest cost and 15 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link DSL-4320L User Manual...
Metric: Enter the metric value for this rule here. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link DSL-4320L User Manual...
Enter a timeout time (in hours). Click Save when you are done. At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic DNS host, refer to 113 for more information. D-Link DSL-4320L User Manual...
Enter the host name that you registered with your dynamic DNS service provider. IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click Apply when you are done. D-Link DSL-4320L User Manual...
Click Save when you are done. To configure and manage your schedules, click Schedule and refer to page 115 for more information. D-Link DSL-4320L User Manual...
You can add multiple days to the schedule, but only one period per day. To remove a time period from the schedule, click on the cross icon. Click Apply when you are done. D-Link DSL-4320L User Manual...
The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 115 for more information. Click Save when you are done. D-Link DSL-4320L User Manual...
DIR-860L and 8080 is the port used for the web management interface. Note: If you enabled HTTPS Server and wish to access the router remotely and securely, you must enter https:// at the beginning of the address. D-Link DSL-4320L User Manual...
Page 122
If you enabled remote management, enter the remote port number that the router will use for that protocol. Click Save when you are done. To load, save, or reset settings, or reboot the router, click Save. D-Link DSL-4320L User Manual...
You may select Never, Daily, or Weekly. Day of the Choose the day of the week to automatically reboot the router. week: Time: Choose the time of day to automatically reboot the router. Click Save when you are done. D-Link DSL-4320L User Manual...
Next, click the Upgrade Firmware button and Firmware: browse to the file to install the new firmware. You can also browse to a language pack file to install a new language pack. D-Link DSL-4320L User Manual...
You can view the Internet, LAN, Wi-Fi 2.4 GHz, or Wi-Fi 5 GHz by clicking on the respective tabs at the top. The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link DSL-4320L User Manual...
WPS. Once you know, follow the steps below: Step 1 - Press the WPS button on the DSL-4320L for about 1 second. The Internet LED on the front will start to blink. WPS Button Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS process).
Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DSL-4320L User Manual...
WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DSL-4320L User Manual...
If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DSL-4320L User Manual...
Page 130
If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DSL-4320L User Manual...
Page 131
It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DSL-4320L User Manual...
Section 5 - Connecting to a Wireless Network The WPS feature of the DSL-4320L can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu.
Page 133
Section 5 - Connecting to a Wireless Network 3. Double-click the DSL-4320L. DSL-4320L 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next. D-Link DSL-4320L User Manual...
Page 134
Section 5 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DSL-4320L User Manual...
Page 135
Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DSL-4320L User Manual...
(displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DSL-4320L User Manual...
1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DSL-4320L User Manual...
Page 138
It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DSL-4320L User Manual...
Wi-Fi network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DSL-4320L User Manual...
1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect. D-Link DSL-4320L User Manual...
Page 141
It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. D-Link DSL-4320L User Manual...
1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.1.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
Page 143
• Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.
Page 144
• Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DSL-4320L User Manual...
Page 145
• To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DSL-4320L User Manual...
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
Page 148
Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits • Gives everyone at home broadband access •...
The wireless connection in public places is usually called “hotspots”. Using a D-Link CardBus adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centers.
• Ad-hoc – Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DSL-4320L wireless network CardBus adapters. An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point.
Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DSL-4320L User Manual...
Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DSL-4320L offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) •...
Environmental factors will adversely affect wireless signal range. • Frequency Range varies depending on country’s regulation. • The DSL-4320L does not include 5.25-5.35 GHz & 5.47-5.725 GHz in some regions. D-Link DSL-4320L User Manual...