Table of Contents
Advertisement
In this page, you should use static DNS IP address for IPoA mode. Enter
Step 9
primary DNS server and secondary DNS server. Click Next, and the
following page appears.
Click Apply/Save to save all the configurations. And the following page
Step 10
appears. If you want to make any modifications, click Back.
4.3.2.5 Adding a Bridge Configuration
In the WAN Service Setup page, click Add to add WAN configuration. This section
describes the procedure for adding br_0_0_32 (Bridge mode).
Step 1
Click Add to turn into the following page. (At first, you must add suitable
ATM configuration for this WAN configuration.) In this page, you can
42
Advertisement
Table of Contents
