with IPoA or static MER protocol is configured, you must enter static
DNS server IP addresses. Click Next, and the following page appears.
Step 7
In this page, it shows all the configurations. Click Apply/Save to all the
configurations, and the following page appears. Click Back to make any
modifications.
4.3.2.2 Adding a MER (IPoE) Configuration
In the WAN Service Setup page, click Add to add WAN configuration. This section
describes the procedure for adding ipoe_0_0_32 (Mer mode).
Step 1
Click Add to turn into the following page. (At first, you must add suitable
ATM configuration for this WAN configuration.)
27