D-Link DSL-6540U User Manual page 40

High-speed vdsl2 router

Hide thumbs Also See for DSL-6540U:

Table of Contents

Step 8

In this page, you can get DNS server information from the selected WAN

interface or enter static DNS server IP addresses. If only a single PVC

with IPoA or static MER protocol is configured, you must enter static DNS

server IP addresses. Click Next and the following page appears.

Step 9

In this page, click Apply/Save to save all the configurations, and the

following page appears. If you want to make any modifications, click

Back.

4.3.2.4 Adding an IPoA Configuration

This section describes the procedure for adding ipoa_0_0_35 (IPoA mode).

Table of Contents