Sharp LC-32WD1E/S/RU Service Manual page 31

LC-32WD1E/S/RU, LC-37WD1E/S/RU, LC-42WD1E/S/RU, and LC-32/37/42WT1E
[8.4] Using Error Count
Item # Item
926 Error Count
[8.5] Using LCD Size
Item # Item
927 LCD Size
Adjustment Conditions
None.
Adjustment Conditions
This setting must be set after
replacing the mainboard to make
sure the right settings are loaded
for the TV (gamma table, etc.)
Adjustment Procedure
1. Enter the adjustment process mode.
2. Go to this item. The number displayed is the number of
times the TV went into reset due to an error.
Adjustment Procedure
1. Enter the adjustment process mode.
2. Go to this item. Press
1 = LC-32WD1E, LC-32WT1E
2 = LC-32WD1S
3 = LC-32WD1RU
4 = LC-37WD1E, LC-37WT1E
5 = LC-37WD1S
6 = LC-37WD1RU
7 = LC-42WD1E, LC-42WT1E
8 = LC-42WD1S
9 = LC-42WD1RU
5 - 12
to set the size of the panel: