Sharp LC-32WD1E/S/RU Service Manual page 23

LC-32WD1E/S/RU, LC-37WD1E/S/RU, LC-42WD1E/S/RU, and LC-32/37/42WT1E
7. Select the image file(s) you want to upgrade.
a. For each image file that you want to upgrade, press Select to open a browse window.
b. Browse to the location of the new image files and select the file.
Note:
c. Select Program All to start the upgrade. DO NOT INTERRUPT THIS SEQUENCE!
• The image files must be on the hard drive of the controlling PC. They cannot be on a
network connection.
• The image file names may vary. Use the release notes to identify the correct image
file.
• The image files may be located in the subdirectories of the software package.
• To make sure the tool is working properly, you can first try to download only the *.cfg
files. They are small so you will see rather quickly if something is going wrong.
5 - 4