Recording A Cd By Specifying Track Order - Sony MHC-V909AV Operating Instructions Manual

Recording a CD by
specifying track order
— Program Edit
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
This function cannot be used during menu
playback of VIDEO CDs with PBC functions
(Ver 2.0).
11 3
POWER
5 6 10 12
FUNCTION
EDIT
07/46-48_MHC-V909AV.11E
Actual page number:
1
2
3
4
4
1 2
p
5
6
1
π
7
DOLBY
NR
8
8
CHECK
47
Place a CD and insert a blank tape
into deck B.
Press FUNCTION repeatedly until
"CD" appears in the display.
Press PLAY MODE repeatedly until
"PROGRAM" appears in the
display.
Press one of the DISC 1~3 buttons to
select a CD.
Turn the jog dial until the desired
track appears in the display.
Total playing time
Disc number (including selected track)
1DISC PROGRAM
Track number
Press ENTER/NEXT.
The track is programmed. "STEP" and
the programmed playing order appear,
followed by the total playing time.
Total playing time
1DISC PROGRAM
Previously selected track
To program additional tracks to be
recorded on side A, repeat steps 4 to
6.
Skip step 4 to select tracks from the same
disc.
Press P on the remote to insert a
pause at the end of side A.
"P" appears in the display and the total
playing time resets to "0.00" in the
display.
98.11.9, 11:47 AM
SONY MHC-V909AV (E) 3-860-316-11
VOLUME
VOLUME
continued
47