Playing A Video Cd From Where It Was Last Stopped - Sony MHC-V909AV Operating Instructions Manual

Playing a VIDEO CD
from where it was
last stopped
–– Resume Play
When playing a VIDEO CD, the CD player
will remember where playback was stopped.
Therefore, you can play a VIDEO CD starting
from the point where it was last stopped.
2
POWER
SELECT
CD (
06/29-45_MHC-V909AV.11E
Actual page number:
1
Press p to stop VIDEO CD
playback.
The CD player remembers this position.
2
Press RETURN (or ˆ RETURN on
the remote) during stop mode.
"RESUME" flashes in the display and
appears on the TV screen for about 16
seconds.
3
Press ·∏ (or SELECT CD ( on
the remote) while "RESUME" is
flashing.
1 3
Playback resumes from the point where
it was stopped in step 1.
If "RESUME" stops flashing before you
press ·∏ (or SELECT CD ( on the
remote), press RETURN (or
ˆ RETURN on the remote) again.
To play a VIDEO CD from the
beginning
• Press ·∏ (or SELECT CD ( on the
remote) while "RESUME" is not flashing.
• Press RETURN (or ˆ RETURN on the
remote) again while "RESUME" is flashing.
Notes
• Resume Play does not work with audio CDs.
• If "RESUME" does not flash, Resume Play cannot
be used.
• Resume Play does not work during Shuffle or
Program Play.
• Depending on where you stop playback, Resume
Play may not resume from the exact same point
or may not work.
• The following operations will clear the resume
memory:
– Removing the disc
ˆ RETURN
– Pressing DISC SKIP EX-CHANGE (or D. SKIP
on the remote)
p – Unplugging the power cord
– Switching the play mode
– Pressing p during stop mode
39
SONY MHC-V909AV (E) 3-860-316-11
98.11.9, 11:47 AM
39