Sony MHC-V909AV Operating Instructions Manual page 7

Inserting two size AA (R6)
batteries into the remote
Using the remote
You can use shaded the buttons shown below
to operate Sony TV.
TV/VIDEO
To Press on the remote
Turn the TV on or TV POWER.
off
Switch the TV's TV/VIDEO.
video input
Change the TV TV CH +/–.
channels
Adjusts the volume TV VOL +/–.
of the TV speaker(s)
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
03/04-11_MHC-V909AV.11E
Actual page number:
To attach the center speaker pads
Attach the supplied center speaker pads to
the bottom of the center speaker to stabilize
the speakers and prevent them from slipping.
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the front speakers to stabilize the
speakers and prevent them from slipping.
TV POWER
TV VOL +/–
TV CH +/–
Tip
You can reinforce the bass sound by connecting an
optional super woofer to the super woofer
connector.
Note
You need to connect both left and right rear
speakers. Otherwise, the sound will not be heard.
When carrying this system
Do the following to protect the CD
mechanism.
1 Press FUNCTION repeatedly until "CD"
appears in the display.
2 Hold down PLAY MODE and press
POWER so "LOCK" appears in the display.
7
SONY MHC-V909AV (E) 3-860-316-11
98.11.9, 11:45 AM
7