Recording From A Tape - Sony MHC-V909AV Operating Instructions Manual

Recording from a
tape
— High-speed Dubbing
You can use TYPE I (normal) or TYPE II
(CrO ) tapes.
2
3
POWER
1 2
π
1
Press § and insert a recorded tape
in deck A and a blank tape in deck
B.
With the side
you want to
play/record
facing forward.
2
Press HIGH SPEED DUBBING.
Deck B stands by for recording.
3
Press DIRECTION repeatedly to
select A to record on one side.
Select a (or RELAY) to record on
both sides.
26
05/15-28_MHC-V909AV.11E
Actual page number:
4 1
π
º ‚
ª ·
π
§
26
4
Press ∏ PAUSE.
Dubbing starts.
To stop dubbing
Press π on deck A or B.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION to a when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• You don't have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
98.11.9, 11:46 AM
SONY MHC-V909AV (E) 3-860-316-11