Specifications - Sony MHC-V909AV Operating Instructions Manual

Specifications

Amplifier section
Continuous RMS power output
FRONT SPEAKER:
REAR SURROUND SPEAKER:
CENTER SURROUND SPEAKER:
Peak music power output:1,500 watts
Inputs
AUDIO IN (phone jacks) voltage 250 mV,
MIX MIC (phone jack):
Outputs
AUDIO OUT (phono jacks):
VIDEO (phono jack):
S-VIDEO (4-pin/mini-DIN jack):
PHONES (stereo phone jack):
FRONT SPEAKER:
REAR SURROUND SPEAKER:
CENTER SURROUND SPEAKER:
SUPER WOOFER:
11/61-68_MHC-V909AV.11E
Actual page number:
100 + 100 watts (8 ohms,
at 1 kHz, 10% THD)
12.5 + 12.5 watts (16
ohms, at 1 kHz, 10%
THD)
25 watts (8 ohms, at 1
kHz, 10% THD)
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
voltage 250 mV
impedance 1 kilohms
max. output level
1Vp-p, unbalanced,
Sync negative,
load impedance 75 ohms
Y: 1 Vp-p, unbalanced,
Sync negative
C: 0.286 Vp-p,
load impedance 75 ohms
accepts headphones of 8
ohms or more
accepts impedance of 8 to
16 ohms.
accepts impedance of 8
ohms.
accepts impedance of 8
ohms.
voltage 1 V impedance
1 kilohms
65
Video CD / CD player section
System Compact disc digital
audio and video system
Laser Semiconductor laser
(λ=780nm)
Emission duration:
continuous
Max. 44.6 µ W*
Laser output
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Wavelength 780 – 790 nm
Audio
Frequency response: 2 Hz – 20 kHz (±0.5 dB)
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Video
Color system format: NTSC, PAL
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength 600 nm
Output Level –18 dBm
Tape player section
Recording system 4-track 2-channel stereo
Frequency response 60 – 13,000 Hz (±3 dB),
(DOLBY NR OFF) using Sony TYPE I
cassette
60 – 14,000 Hz (±3 dB),
using Sony TYPE II
cassette
Wow and flutter ±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
98.11.9, 11:50 AM
SONY MHC-V909AV (E) 3-860-316-11
continued
65