Fan
Description
Fan (includes cable)
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service door (see
5.
Remove the battery (see
6.
Remove the keyboard (see
7.
Remove the internal base enclosure (see
Remove the fan:
1.
Loosen the two captive Phillips screws (1) that secure the fan to the base enclosure.
2.
Disconnect the fan cable (2) from the system board.
3.
Remove the fan (3).
Reverse this procedure to install the fan.
ENWW
Service door on page
Battery on page
31).
Keyboard on page
38).
Internal base enclosure on page
29).
46).
Component replacement procedures
Spare part number
730792-001
49