1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service door (see
5.
Remove the battery (see
Remove the display panel:
1.
Lift to disengage the bezel on the bottom (1), left and right sides (2), and top (3).
2.
Remove the bezel from the display assembly (4).
3.
Remove the four Phillips PM2.0×3.0 screws (1) that secure the display panel to the display enclosure.
4.
Lift and rotate the panel onto the computer (2).
42
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service door on page
Battery on page
31).
29).
ENWW