Internal base enclosure
Description
Internal base enclosure
Before removing the internal base enclosure, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Service door (see
b.
Battery (see
c.
Keyboard (see
Use the following image as an overview of all internal base enclosure screw locations.
Remove the internal base enclosure:
1.
Position the computer upside down.
46
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service door on page
Battery on page
31)
Keyboard on page
38)
29)
Spare part number
779684-001
ENWW