5.
On the back of the display panel, lift the tape that secures the display cable to the display panel (1), and
the disconnect the display cable from the panel (2).
6.
Lift the display panel from the display enclosure.
7.
If it is necessary to replace the webcam/microphone module:
a.
Release the tape that secures the webcam cable to the module (1).
b.
Disconnect the cable (2) from the module.
CAUTION:
damage when not handled carefully.
ENWW
Handle the module with caution. The module has a thin profile and is susceptible to
Component replacement procedures
43