7.10 Grinder adjustment during servicing
Loosen the screw on the coffee
container.
WARNING:
- Grinding must be adjusted with the motor in movement.
- Adjust the grinding level by one step at a time.
- After setting grinding, run two grinding cycles and check the resulting gran-
ules and dose.
- Repeat if further adjustment is required.
TALEA Section 07
REV00 - August 06
Ideas with Passion
To vary the grinding setting,
tighten or loosen with wrench "A"
supplied.
(+) = Coarse grinding
( - ) = Fine grinding.
10/11