Oetiker Clamp Assembly And Disassembly; Heater Clamps - Saeco Talea Touch Technical & Service Manual

7. 7

OETIKER clamp assembly and disassembly

Heater clamps

1
HEATER
Figure (1) shows the assembly position of the clamp on the heater connector.
Solenoid pilot
2
SOLENOID PILOT
Figure (2) shows the assembly position of the clamp on the plastic solenoid pilot connectors.
To remove the clamp, use a pincer as shown in (B)
TALEA Section 07
REV00 - August 06
Ideas with Passion
Use suitable pliers to tighten the clamp.
A
Ensure correct tightening (A) and position-
ing as shown in illustrations (1) / (2).
B
7/11