Product Technical Data - Saeco Talea Touch Technical & Service Manual

2.1

Product technical data

Power supply and output:
Temperature control:
Safety system:
Coffee heat exchanger output:
Stainless steel
Motorized tank only on
Talea Touch and Ring Plus.
Water level and drip
tray sensor:
Gearmotor:
Cup warmer plate:
Solo Talea Touch and Ring Plus
Pump:
Pressure relief valve:
Water filter:
Coffee grinder:
Solenoid pilot:
Coffee dose control:
Amps:
Dimensions: l x h x d in mm:
Weight:
Water tank capacity:
Coffee container capacity:
Coffee grounds drawer capacity:
Heatex changer capacity:
Water circuit filling time:
Heating time:
Dispensed drink temperature:
Grinding time:
TALEA Section 02
REV00 - August 06
Ideas with Passion
230 V~, 50/60 Hz, 1300 W.
1 (NTC) variable resistor sensor – transmits the value
to the electronic board.
2 x 175°C manual reset thermostats.
1300 W – to dispense coffee, hot water and steam.
24V stepper motor.
Capacitive sensor
33VC with 2 directions of rotation.
Activated via MENU display.
PTC Type.
Ulka reciprocating piston type with thermal cutout at
100°C,
48 W, 230V, 50 Hz, Type EX5 approx. 13-15 bars.
Opening at approx. 18-20 bars.
In tank.
DC motor with ceramic plate
grinders.
15 VA.
Hall sensor – Pulse control. Dose adjustment can
be set from approx. 7 to 10.5 g.
During heating phase- approx. 5.6 A.
300/375/410
10 kg (average).
1.7 l.
250g coffee granules.
14
Approx. 10 cc.
Approx. 15 sec on first filling cycle.
Approx. 45 sec.
Approx. 73°C - 83°C
Approx. 8-10 sec.
1/4