Coffee Grinder Adjustment; Solenoid Valve And Assembly Drain Valve - Saeco GranBaristo Avanti Service Manual

GRAN BARISTO
7.5.
Adjustment by a service center
7.6.
Loosen the screws holding the
solenoid valve to the upper plate
Downloaded from www.Manualslib.com

Coffee grinder adjustment

C
-

Solenoid valve and assembly drain valve

manuals search engine
The grinding adjustment can be set by the
user (only with the coffee grinder in opera-
tion) by pressing and turning (only by one
click at a time) the insert inside the coffee
bean hopper with the aid of the wrench sup-
plied.
To adjust grinding further, the tecnical service can
work directly on the coffee grinder by pressing
A
and turning the ring nut (C) shown. (clockwise
+ to increase the particle size of the coffee and
anticlockwise - to decrease it).
If there are any remains of coffee powder between
the two grinding blades it is recommended to tighten
by max. two marks at a time.
Lastly, move the point yellow (A) on the adjustment
knob to the center of the adjustment .
Loosen the screws holding in
the support the solenoid valve.
07 DISASSEMBLY
Disconnect all electrical and
water circuit connections.
Slide out the fork as illustrated
and disconnect the electrical /
idraulics connections.
Page 04 / 09