Test Printing - Konica Minolta bizhub C252 User Manual

Various Printing Methods
4
Click the [Preferences] button or the [Properties] button to change the
printer driver settings as necessary.
– By clicking the [Preferences] button or the [Properties] button on
the Print dialog box, you can specify the settings of each model on
the printer driver dialog box that appears. For details, refer to "Set-
ting Up the PCL Driver" on page 5-1, "Setting Up the PostScript
Driver (Windows)" on page 6-1 or "Setting Up the PPD Driver (Win-
dows)" on page 7-1.
If the changed settings are not saved in the Print dialog box, the
original settings are restored when the application is quit.
5
Click the [Print] button.
The Data indicator of this machine flashes.

Test Printing

Printing is possible when the printer driver is installed and the network set-
tings have been specified. To check that connection has been made proper-
ly, you can print the standard Windows test page.
Print a test page from the printer driver Properties dialog box.
1
For Windows 98SE/Me/2000/NT 4.0, click the [Start] button, point to
"Settings", and then click "Printers".
For Windows XP/Server 2003, click the [Start] button, and then click
"Printers and Faxes".
– If "Printers and Faxes" does not appear in the Start menu, open the
Control Panel from the Start menu, select "Printers and Other Hard-
ware", and then select "Printers and Faxes".
2
Right-click the icon of the installed printer, and then click "Properties".
3
Click the General tab, and then click the [Print Test Page] button or the
[Print Test] button.
The test page is printed and the confirmation dialog box appears.
4
Check the printout, and then click the [OK] button or the [Yes] button.
Note
If the test page is not printed properly, check that the printer driver has
been installed properly and that the network settings are complete.
C252
4
4-2