Konica Minolta bizhub C252 User Manual page 190

Setting Up the PostScript Driver (Windows)
2
Right-click the printer icon, and then click "Properties".
3
Click the Option tab.
4
Select "Model" from the list, and then select the model to be used from
the "Setting" drop-down list.
5
Select the option, and then specify the installation status from the
drop-down list below.
Note
The installed option can be automatically registered in the "Option" list by
clicking the [Gather Option Information] button when connected to this
machine.
The [Gather Option Information] button can only be used when the SNMP
setting is enabled on this machine and the SNMP v1/v2c (IP) setting
check box is selected.
When the Mail Bin Kit is installed, you can assign output tray 1 and output
tray 2 as mail bins.
To assign the output destination of the mail bins, select Bin Setting from
"Administrator Setting"—"System Setting"—"Output Setting" on the
control panel.
If "Printer" is displayed when specifying the output destination in the
printer driver, the mail bin that is selected is shown in the figure.
C252
6
6-27