Table of Contents
Advertisement
setup screen
4. Select a desired <Defined Area Based Rules>.
• Entering : An event where a moving object passes through the defined area and
enters inside will be detected.
• Exiting : An event where a moving object passes through the defined area and
exits outside will be detected.
5. Click [OK].
To cancel the existing zone, Click the [Clear (
6. When done, click [Apply (
To use the IV analysis function according to the whole area based rule
1. Set <IV analysis function> to
<Enable>.
2. Set the event rule to <Appearing/
Disappearing Detection>, and drag
the video using the mouse.
• Appearing : An event where an
object that has not existed suddenly
appears will be detected.
• Disappearing : An event where an
object that has existed suddenly disappears will be detected.
3. Click [OK].
To cancel the existing zone, Click the [Clear (
4. When done, click [Apply (
92_ setup screen
)].
)].
)].
)].
Advertisement
Table of Contents
