Samsung SNP-3302 User Manual page 72

setup screen
To set the tracing function
Tracking remembers the trace of movements instructed using the direction button and
reproduces it for your reference.
1. Set <Mode> in <Sequence setup> to
<Trace & Auto Run>.
The menu screen will switch to the
PTZ tracking and Auto operation menu
screen.
2. Select a tracking number.
The operation will be saved with display
of the memory usage. The saving time
differs, depending on the level of the
PTZ operation.
This process will be terminated if the memory is full.
3. Press the [
Selected tracing number will be saved.
4. Press the [
Selected tracing number will be activated as set.
5. Press the [
Tracing will be stop.
To set the auto run
This will perform the sequence operation that you have specified if no controller
manipulation is made for a certain time.
1. Set <Mode> in <Sequence setup> to
<Trace & Auto Run>.
The menu screen will switch to the
PTZ tracking and Auto execution menu
screen.
2. Select an auto run mode.
• Home : Automatically executes the
operation to the home position.
• Preset : Automatically executes the
operation to the preset number.
• Swing : Automatically executes the operation in Swing mode.
• Group : Automatically executes the operation in Group mode.
• Tour : Automatically executes the operation in Tour mode.
• Trace : Automatically executes the operation in Trace mode.
• Auto pan : Automatically executes the 360° rotation in the pan direction.
72_ setup screen
] button.
] button.
] button.