Table of Contents
Advertisement
INSTALLATION
Preparing Adapter and Cable
Plug the power adapter into a power outlet.
Check out the rated voltage and current before making connections.
Rated Power
AC 24V
J
SNP-3302/3371 : If PoE+ and AC 24V are both applied, this camera will get supplied with power
from PoE+.
SNP-3302H/3371H/3371TH
If PoE+ and AC 24V are both applied in heater operation mode, the heater will be powered by
-
AC 24V and the other devices will get supplied with power from PoE+.
-
If PoE+ and AC 24V are both applied with heater turned off, this camera will get supplied with
power from PoE+.
If using PoE, the heater will not operate at all.
-
Use an adaptor if the installation site requires heater operations. Adaptor is sold separately.
-
For installation and specification of the power adaptor, refer to the related section.
Allowable Input Voltage
AC 22V ~ 26V
Current Consumption
2.5 A
English _29
Advertisement
Table of Contents
