Table of Contents
Advertisement
• Group No. : Select a group number.
• Preset No. : Select a preset number.
• Speed : Specify the speed of movement.
• Dwell time : Specify the duration for which an operation is kept at the preset
position.
3. Press the [
] button.
Your settings will be entered in the right list.
4. Press the [
] button.
Set data on the right list will be saved.
5. Press the [
] button.
Selected group data will be deleted.
To configure the tour settings
The tour function enables you to call groups of your presets in sequence.
1. Set <Mode> in <Sequence setup> to
<Tour>.
The menu screen will switch to the tour
setting screen.
2. Configure the tour settings in detail.
• Group No. : Select a group number.
• Dwell time : Specify a waiting time
before a new group is called.
3. Press the [
] button.
Your settings will be entered in the right list.
4. Press the [
] button.
Set data on the right list will be saved.
5. Press the [
] button.
Selected tour data will be deleted.
English _71
Advertisement
Table of Contents
