Table of Contents
Advertisement
If the focus of the camera directly faces the florescent lighting or if the camera is installed in a
-
place of variable illumination, the white balancing operation may be unstable.
WDR Setup
You can set to display a sharp image of the objects in a scene where both bright and dark
areas exist.
1. Select <Backlight>.
2. Set <Mode> to <WDR>.
3. Select each item and set it properly.
• WDR Limit : Specify the WDR
sensitivity level.
• WDR Level : Specify the WDR related
levels.
M
If WDR mode is active, the shutter mode
cannot be changed. Data transfer via the
network is available at up to 15 fps.
If the WDR mode is active, a moving
object can cause an afterimage on the
screen.
BLC Setup
You can specify a desired area on the video manually and set the area to be displayed
more clearly.
1. Select <Backlight>.
2. Set <Mode> to <BLC>.
3. Select each item and set it properly.
• BLC level : You can change the
level to adjust the brightness of the
monitoring area.
• BLC/HLC Box Mode : Specify the
mode of BLC or HLC Box.
• BLC/HLC Box Steps : Specify the
pixel unit for movement. You can use
the arrow buttons of <BLC/HLC Box
Adjustment> to add or reduce the
pixels.
English _75
Advertisement
Table of Contents
