Connection Setup Example (Windows Xp) - ATEN KN4164Vl User Manual

KVM over IP Switch User Manual

Connection Setup Example (Windows XP)

To set up a dial-in connection to the KVM over IP switch under Windows XP,
do the following:
1. From the Start menu, select Control Panel
Create a New Connection.
2. When the Welcome to the New Connection Wizard dialog box appears,
click Next to move on.
3. In the Network Connection Type dialog box, select Connect to the network
at my workplace, then click Next.
4. In the Network Connection dialog box, select Dial-up connection, then
click Next.
5. In the Connection Name dialog box, key in a name for the connection (for
example, TPE-KN8132-01), then click Next.
6. In the Connection Availability dialog box, you can select either Anyone's
use or My use only, depending on your preferences, then click Next.
Note: If you are the only user on this client computer, this dialog box won't
appear.
7. In the Phone Number to dial dialog box, key in the phone number of the
modem connected to the KVM over IP switch (be sure to include country
and area codes, if necessary), then click Next.
8. In the Completing the New Connection Wizard dialog box, check Add a
shortcut to this connection on my desktop, then click Finish.
This completes the connection setup. Double click the desktop shortcut icon to
make a PPP connection to the KVM over IP switch.
258
→
Network Connections
→