Enable Dial Back; Enable Dial Out - ATEN KN4164Vl User Manual

Enable Dial Back

As an added security feature, if this function is enabled, the switch disconnects
the calls that dial in to it, and dials back to one of the entries specified in the
table below:
Item
Enable Fixed If Fixed Number Dial Back is enabled, when there is an incoming call,
Number Dial
the KVM over IP switch hangs up the modem and dials back to the
Back
modem whose phone number is specified in the Phone Number field.
Key the phone number of the modem that you want the KVM over IP
switch to dial back to in the Phone Number field.
Enable
If Flexible Dial Back is enabled, the modem that the KVM over IP
Flexible Dial
switch dials back to doesn't have to be fixed. It can dial back to any
Back
modem that is convenient for the user, as follows:
1. Key the password that the users must specify in the Password field.
2. When connecting to the KVM over IP switch's modem, users spec-
ify the phone number of the modem that they want the KVM over IP
switch to dial back to as their Username, and specify the password
set in the Password field for their password.

Enable Dial Out

For the dial out function, you must establish an account with an Internet
Service Provider, and use a modem to dial up to your ISP account. An
explanation of the Enable Dial Out items is given in the table below:
Item
ISP Settings Specify the telephone number, account name (username), and
password that you use to connect to your ISP.
Dial Out Schedule This entry sets up the times you want the KVM over IP switch to dial
out over the ISP connection.
Every provides a listing of fixed times from every hour to every
four hours.
If you select Every two hours (for example), the KVM over IP
switch will start dialing out every two hours beginning at
00:00.
If you don't want the KVM over IP switch to dial out on a fixed
schedule, select Never from the list.
Daily at will dial out once a day at a specified time. Use the hh:mm
format to specify the time.
PPP online time specifies how long you want the ISP connection
to last before terminating the session and hanging up the modem.
A setting of zero means it is always on line.
Chapter 8. Device Management
Action
Action
171