Connection Setup Example (Windows Xp) - ATEN KN1000A User Manual

KN1000A User Manual

Connection Setup Example (Windows XP)

To set up a dial-in connection to the KN1000A under Windows XP, do the
following:
1. From the Start menu, select Control Panel
Create a New Connection.
2. When the Welcome to the New Connection Wizard dialog box appears,
click Next to move on.
3. In the Network Connection Type dialog box, select Connect to the network
at my workplace, then click Next.
4. In the Network Connection dialog box, select Dial-up connection, then
click Next.
5. In the Connection Name dialog box, key in a name for the connection (for
example, TPE-KN1000-01), then click Next.
6. In the Connection Availability dialog box, you can select either Anyone's
use or My use only, depending on your preferences, then click Next.
Note: If you are the only user on this computer, this dialog box will not
appear.
7. In the Phone Number to dial dialog box, key in the phone number of the
modem connected to the KN1000A (be sure to include country and area
codes, if necessary), then click Next.
8. In the Completing the New Connection Wizard dialog box, check Add a
shortcut to this connection on my desktop, then click Finish.
This completes the connection setup. Double click the desktop shortcut icon to
make a PPP connection to the KN1000A.
156
→
Network Connections
→