58
PROGRAMMING MODE - TEST MODE
2. Factory reset -
After factory reset, machine information is changed to the default value.
Entering set up mode.
You will see LqC1
NOTE
• Washing time
• Rinse cycle
• Top spin speed
• Add SUPER WASH
Press the Colors or the Perm.Press button until
Press the START button.
Press the Colors button until
Press the START button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch.
• Card type – Insert the service card.
• OPL type – Push the Whites button twice.
10 minutes
twice
1,000 RPM
3 minutes extra wash and one extra rinse
Button
appears in the display.
appears in the display.
Display