11-4. vend type setup - card type or coin type setup
Entering set up mode.
You will see LqC1
Press the Whites button.
Press the Colors or the Perm.Press button until
Press the START button.
Press the Colors or the Perm.Press button until
Press the START button.
Display
Press the Colors or the Perm.Press button until
Press the START button.
Press Colors or Perm.Press button and then select
1.Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
NOTE
• After setting the Value to VEND, vend type is changed directly without power on/off
in washer
.
or
.
Coin type
Card type
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type - Push the Whites button twice.
PROGRAMMING MODE - SETUP MODE
Button
appears in the display.
appears in the display.
appears in the display.
39
Display
One or the other will
display.
(Sense dry) is not available